← All parts
7 Segment Display Internet Clock
AdafruitAdafruit Feather M0 WiFi
A clock that displays the current time using a 7 segment display, fetched from the Internet via NTP.
In stock
Specifications
7- Operating Voltage
- 3.3V (from LiPo or USB) [1]
- Logic Level
- 3.3V
- Flash
- Not specified
- Ram
- Not specified
- Gpio Count
- 10
- Dimensions
- Not specified
- Connectivity
- WiFi, NTP, OLED display
Pinout
8Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 3 | VCC | POWER | Power for the Feather M0 WiFi |
| 4 | GND | GND | Ground for the Feather M0 WiFi |
| 8 | CS | SPI | Chip Select for WINC1500 WiFi module |
| 7 | IRQ | SPI | Interrupt Request line for WINC1500 WiFi module |
| 4 | RST | SPI | Reset line for WINC1500 WiFi module |
| 2 | EN | SPI | Enable line for WINC1500 WiFi module |
| 3 | OLED_RESET | GND | Reset pin for OLED display |
| 9 | VBATPIN | ADC | Analog input to read battery voltage |
Interactive pinout
Highlight:
Adafruit Feather M0 WiFi
Click a pin to copy its name · tap a tag above to spotlight a bus.