← All parts
Adabox 001 Temperature Alarm
AdafruitFeather 32u4 Adalogger
Adabox 001 is a temperature monitoring device with an alarm feature, using a TMP36 sensor and tactile buttons for adjusting the alarm threshold.
In stock
Specifications
2- Operating Voltage
- 5V (USB) / 3.3V (battery) via 3V pin on Feather
- Gpio Count
- 12
Pinout
12Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 5 | LCD_4 | GPIO | Connected to LCD pin 5 |
| 6 | LCD_1 | GPIO | Connected to LCD pin 1 |
| 9 | LCD_11 | GPIO | Connected to LCD pin 11 |
| 10 | LCD_12 | GPIO | Connected to LCD pin 12 |
| 11 | LCD_13 | GPIO | Connected to LCD pin 13 |
| 12 | LCD_14 | GPIO | Connected to LCD pin 14 |
| 16 | LCD_16 | GND | Connected to LCD pin 16 and GND |
| 2 | lowerAlarmTemp | GPIO | Connected to tactile button for lowering alarm temperature |
| 3 | raiseAlarmTemp | GPIO | Connected to tactile button for raising alarm temperature |
| 13 | buzzer | PWM | Connected to piezo buzzer |
| 0 | greenLed | GPIO | Connected to green LED for status indication |
| 1 | redLed | GPIO | Connected to red LED for status indication |
Interactive pinout
Highlight:
Feather 32u4 Adalogger
Click a pin to copy its name · tap a tag above to spotlight a bus.