← All parts
16 Channel Servo Driver With Raspberry Pi
AdafruitRaspberry Pi
A 16-channel servo driver for Raspberry Pi using the PCA9685 chip, controlled via I2C.
In stock
Specifications
3- Operating Voltage
- 3.3V (IC), 5V (Servos)
- Gpio Count
- 16
- Connectivity
- I2C
Pinout
4Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| VCC | 3.3V | POWER | Digital supply for the IC |
| GND | GND | GND | Ground for the IC and servos |
| SCL | I2C SCL | I2C | Serial clock line for I2C communication |
| SDA | I2C SDA | I2C | Serial data line for I2C communication |
Interactive pinout
Highlight:
Raspberry Pi
Click a pin to copy its name · tap a tag above to spotlight a bus.