← All parts
2 13 250X122 Quad Color Eink
Adafruit
A 2.13" quad-color eInk display with an onboard SRAM chip and microSD card slot, compatible with Arduino and CircuitPython.
In stock
Specifications
6- Display Type
- 2.13" quad-color eInk display with JD79661 chipset, 250x122 pixels (black, red and yellow ink), white-ish background.
- Resolution
- 250x122 pixels
- Ram
- Small SRAM chip on the back
- Flash
- Not specified
- Operating Voltage
- 3-5VDC
- Logic Level
- 3 or 5V logic safe
Pinout
13| Pin | Name | Functions | Notes |
|---|---|---|---|
| VIN | VIN | POWER | Connect to 3-5VDC |
| 3V3 out | 3V3 out | POWER | Provides about 100mA of 3.3V power |
| GND | GND | GND | |
| ENA | ENA | POWER | Enables the onboard regulator, powering everything when pulled low |
| SCK | SCK | SPI | |
| MISO | MISO | SPI | |
| MOSI | MOSI | SPI | |
| ECS | ECS | SPI | Chip Select for the eInk display |
| D/C | D/C | SPI | Data/Command pin for the eInk display |
| SRCS | SRCS | SPI | Chip Select for the onboard SRAM |
| SDCS | SDCS | SPI | Chip Select for the microSD card, optional |
| RST | RST | GPIO | |
| BUSY | BUSY | GPIO |
Interactive pinout
Highlight:
BOARD
Click a pin to copy its name · tap a tag above to spotlight a bus.