← All parts
Ch9328 Uart To Hid Keyboard Breakout
AdafruitATmega328
A breakout board for an ATmega328 to emulate a HID keyboard via UART.
In stock
Specifications
2- Operating Voltage
- 5V (default) or 3V (configurable via VCC jumper)
- Logic Level
- 3V
Pinout
3Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| VCC | VCC | POWER | 5V by default |
| GND | GND | GND | Common ground for power and logic |
| RX | RX | UART | Connect to UART TX on microcontroller |
Interactive pinout
Highlight:
ATmega328
Click a pin to copy its name · tap a tag above to spotlight a bus.