← All parts
Esp32 C6 Feather
AdafruitESP32-C6
The Adafruit ESP32-C6 Feather is a microcontroller board with WiFi, Bluetooth, and I2C capabilities. It features multiple GPIO pins, an onboard battery monitor, NeoPixel support, and low-power modes.
In stock
Specifications
7- Mcu
- ESP32-C6 WiFi Module (32-bit RISC-V single-core processor, up to 160 MHz)
- Flash
- 4MB
- Ram
- Not specified
- Gpio Count
- 20
- Operating Voltage
- 3.3V
- Logic Level
- 3.3V
- Clock Speed
- 160 MHz
Pinout
35| Pin | Name | Functions | Notes |
|---|---|---|---|
| EN | EN | POWER | 3.3V regulator's enable pin |
| 3.3V | 3.3V | POWER | Output from the 3.3V regulator, can supply 500mA peak |
| GND | GND | GND | Common ground for all power and logic |
| BAT | BAT | POWER | Positive voltage to/from the 2-pin JST jack for the optional LiPoly battery |
| USB | USB | POWER | Positive voltage to/from the USB C jack, if USB is connected |
| SCK | SCK | SPI | SPI clock pin (IO21) |
| MOSI | MOSI | SPI | SPI Microcontroller Out / Sensor In pin (IO22) |
| MISO | MISO | SPI | SPI Microcontroller In / Sensor Out pin (IO23) |
| RX | RX | UART | UART receive pin (IO17) |
| TX | TX | UART | UART transmit pin (IO16) |
| SCL | SCL | I2C | I2C clock pin (IO18), 5k pullup |
| SDA | SDA | I2C | I2C data pin (IO19), 5k pullup |
| NEOPIXEL_I2C_POWER | NEOPIXEL_I2C_POWER | POWER | Power control for I2C and NeoPixel, pulled high in CircuitPython and Arduino |
| IO0 | IO0 | GPIO | Digital pin |
| A0 | A0 | ADC | Analog input |
| A1 | A1 | ADC | Analog input |
| A2 | A2 | GPIO | Shared with IO6, digital pin |
| A3 | A3 | GPIO | Shared with IO5, digital pin |
| A4 | A4 | ADC | Analog input |
| A5 | A5 | ADC | Analog input |
| IO6 | IO6 | GPIO | Shared with A2, digital pin |
| IO7 | IO7 | GPIO | Digital pin |
| IO8 | IO8 | GPIO | Digital pin |
| IO9 | IO9 | GPIO | Shared with Boot button and NeoPixel, digital pin |
| IO10 | IO10 | GPIO | Digital pin |
| IO11 | IO11 | GPIO | Digital pin |
| IO12 | IO12 | GPIO | Digital pin |
| IO13 | IO13 | GPIO | Digital pin |
| IO14 | IO14 | GPIO | Digital pin |
| IO15 | IO15 | GPIO | Shared with Red LED, digital pin |
| IO16 | IO16 | UART | UART transmit pin (TX) |
| IO17 | IO17 | UART | UART receive pin (RX) |
| IO18 | IO18 | I2C | I2C clock pin (SCL) |
| IO19 | IO19 | I2C | I2C data pin (SDA), 5k pullup |
| IO20 | IO20 | POWER | I2C power pin, pulled high for STEMMA QT to work properly |
Interactive pinout
Highlight:
ESP32-C6
Click a pin to copy its name · tap a tag above to spotlight a bus.