← All parts
Eyespi Breakout Board
AdafruitFeather RP2040
The Eyespi Breakout Board is a display breakout board that supports various microcontrollers and displays, including the ST7789 TFT display.
In stock
Specifications
2- Operating Voltage
- 3.3V or 5V (Vin) depending on the microcontroller.
- Dimensions
- 0.1" header spacing
Pinout
15| Pin | Name | Functions | Notes |
|---|---|---|---|
| Vin | Power | POWER | 3.3V or 5V depending on the microcontroller |
| Gnd | Ground | GND | Common ground for power and logic |
| SCL | I2C Clock | I2C | |
| SDA | I2C Data | I2C | |
| SCK | SPI Clock | SPI | |
| MOSI | SPI MOSI | SPI | |
| MISO | SPI MISO | SPI | |
| DC | Display Data/Command Selector | GPIO | |
| RST | Display Reset | GPIO | |
| TCS | Touch Screen Chip Select | GPIO | |
| GP1 | General Purpose Input/Output 1 | GPIO | |
| GP2 | General Purpose Input/Output 2 | GPIO | |
| MEMCS | Memory Chip Select | SPI | |
| SDCS | SD Card Chip Select | SPI | |
| Lite | PWM Backlight Control | PWM |
Interactive pinout
Highlight:
Feather RP2040
Click a pin to copy its name · tap a tag above to spotlight a bus.