← All parts
Grayscale 1 5 128X128 Oled Display
Adafruit
A 1.5-inch 128x128 grayscale OLED display with I2C and SPI interfaces.
In stock
Specifications
8- Operating Voltage
- 3-5VDC
- Logic Level
- 3.3V and 12V
- Flash
- N/A
- Ram
- 8KB SRAM
- Gpio Count
- 5
- Dimensions
- 1.5 inches (38mm) diagonal
- Connectivity
- I2C, SPI
- Usb
- N/A
Pinout
6| Pin | Name | Functions | Notes |
|---|---|---|---|
| GND | Ground | GND | Vin - Power pin, 3-5VDC. 3Vo - 3.3V output from the onboard regulator. |
| Rst | Reset | GPIOI2CSPI | Used for reset, can be shared with microcontroller's reset pin. |
| Clk | Clock | I2CSPI | Connected to I2C SCL and SPI SCLK. |
| Data | Data | I2CSPI | Connected to I2C SDA and SPI MOSI. |
| CS | Chip Select | SPI | Used by SPI to select the device. Connect to D5 on Microcontroller. |
| DC | Data/Command | SPI | Differentiates between Data and Commands sent to the display. Connect to D6 on Microcontroller. |
Interactive pinout
Highlight:
BOARD
Click a pin to copy its name · tap a tag above to spotlight a bus.