← All parts
Neodriver I2C To Neopixel Driver
AdafruitATtiny1616
A board that converts I2C data to NeoPixel timing for easy RGB lighting control.
In stock
Specifications
2- Operating Voltage
- 3V-5V (VIN, 5Vin, 5Vo) / 3.3V (GND/G)
- Logic Level
- 3V-5V
Pinout
7| Pin | Name | Functions | Notes |
|---|---|---|---|
| VIN | Power | POWER | For the ATtiny1616 |
| 5Vin | NeoPixel Power Input | GND | For NeoPixels, 5V power input |
| 5Vo | NeoPixel Power Output | GND | For NeoPixels, 5V power output |
| GND/G | Ground | GND | Common ground for power and logic |
| SCL | I2C Clock | I2C | 10K pullup on this pin |
| SDA | I2C Data | I2C | 10K pullup on this pin |
| NEO | NeoPixel Data Output | GPIO | Connects to NeoPixel strip data input |
Interactive pinout
Highlight:
ATtiny1616
Click a pin to copy its name · tap a tag above to spotlight a bus.