← All parts
Powerboost
Adafruit
A DC/DC boost converter module that converts input voltage to a stable 5.2V output for powering various electronics.
In stock
Specifications
3- Operating Voltage
- 1.8V - 5V (input), 5.2V (output)
- Gpio Count
- 2
- Connectivity
- USB, JST connector, 3.5mm terminal block
Pinout
5| Pin | Name | Functions | Notes |
|---|---|---|---|
| BAT | Power In | POWER | Battery input, can range from 1.8V to 5V |
| GND | Ground | GND | Shared ground between input and output |
| 5V | Power Out | POWER | Boosted output voltage, 5.2V when running, may drop to 5V at high current draw |
| EN | Enable | GPIO | Connect to ground to disable the booster and disconnect output |
| LBO | Low Battery Output | GPIO | Pulled high to BAT, drops to 0V when battery voltage < 3.2V |
Interactive pinout
Highlight:
BOARD
Click a pin to copy its name · tap a tag above to spotlight a bus.