← All parts
Prop Maker Featherwing
AdafruitFeather M0 Express, Feather M4
The Adafruit Prop Maker FeatherWing adds NeoPixel control, audio output, and a 3W RGB LED to the Feather series for prop-making projects.
In stock
Specifications
4- Logic Level
- 3.3V/5V (NeoPixel level shifted) / 1.8V-3.6V (audio) / 0-3.3V (switch, accelerometer, LED) / 0-5V (PWM) / 0-3.3V (I2C)
- Operating Voltage
- 1.8V-3.6V
- Dimensions
- 1.25 x 0.9375 inches
- Connectivity
- NeoPixel, I2C (LIS3DH), PWM (LEDs)
Pinout
10| Pin | Name | Functions | Notes |
|---|---|---|---|
| A0 | A0 | ADC | True analog input |
| D13 | Blue | PWM | Connected to Blue LED pin on Feather M0 or M4 |
| D12 | Green | PWM | Connected to Green LED pin on Feather M0 or M4 |
| D11 | Red | PWM | Connected to Red LED pin on Feather M0 or M4 |
| D10 | PWR | GPIO | Power enable for NeoPixels, audio, and RGB LED. Connected to Feather D10 |
| D9 | SW | GPIO | Switch pin connected to Feather D9 |
| D6 | IRQ | GPIO | Interrupt pin for LIS3DH accelerometer, connected to Feather D6 |
| D5 | NEO | I2C | NeoPixel data pin. Connected to Feather D5 |
| SCL | SCL | I2C | I2C clock pin connected to Feather SCL |
| SDA | SDA | I2C | I2C data pin connected to Feather SDA |
Interactive pinout
Highlight:
Feather M0 Express, Feather M4
Click a pin to copy its name · tap a tag above to spotlight a bus.