← All parts
Winc1500 Wifi Shield For Arduino
AdafruitATmega328 (Arduino Uno) or ATSAMD21 (Metro M0 Express)
A WiFi shield for Arduino boards featuring the ATWINC1500 module, supporting SPI and GPIO.
In stock
Specifications
6- Operating Voltage
- 3.3V to 5.5VDC (with level shifting) or 3V/5V logic boards without level shifting.
- Flash
- Not specified
- Ram
- Not specified
- Gpio Count
- 3 GPIO pins for control (CS, IRQ, RST)
- Dimensions
- Not specified
- Connectivity
- SPI and GPIO
Pinout
7Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| CLK | SPI Clock | SPI | SPI clock |
| MISO | SPI MISO | SPI | SPI miso |
| MOSI | SPI MOSI | SPI | SPI mosi |
| CS | Chip Select | GPIO | WINC1500 chip select |
| IRQ | Interrupt Request | GPIO | WINC1500 interrupt request |
| RST | Reset | GPIO | WINC1500 hardware reset |
| EN | Enable | GPIO | Power enable for ultra-power-savings |
Interactive pinout
Highlight:
ATmega328 (Arduino Uno) or ATSAMD21 (Metro M0 Express)
Click a pin to copy its name · tap a tag above to spotlight a bus.