← All parts
Ano Rotary Encoder
AdafruitFeather M4 Express
Ano Rotary Encoder is a directional navigation and scroll wheel with 5 buttons and a rotary encoder. It can be used with any microcontroller that supports pulse-code rotary encoders.
In stock
Specifications
1- Connectivity
- NeoPixel Ring
Pinout
9Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| ENCA | encoder_A | GPIO | Rotary encoder A pin |
| ENCB | encoder_B | GPIO | Rotary encoder B pin |
| SW1 | button_center | GPIO | Center button |
| SW2 | button_down | GPIO | Down button |
| SW3 | button_right | GPIO | Right button |
| SW4 | button_up | GPIO | Up button |
| SW5 | button_left | GPIO | Left button |
| COMA | common_A | GPIO | Common pin A for SW1, ENCA, and ENCB. Set to ground or VCC - usually ground - so that you can use the microcontroller internal pull-ups for the button/encoders. You can also use a GPIO pin and pull it low. |
| COMB | common_B | GPIO | Common pin B for SW2, SW3, SW4, SW5. Set to ground or VCC - usually ground - so that you can use the microcontroller internal pull-ups for the button/encoders. You can also use a GPIO pin and pull it low. |
Interactive pinout
Highlight:
Feather M4 Express
Click a pin to copy its name · tap a tag above to spotlight a bus.