← All parts
Circuitpython Hardware Lis3Dh Accelerometer
AdafruitCircuitPython
The CircuitPython Hardware LIS3DH Accelerometer board supports both I2C and SPI connections for an inexpensive, easy-to-use accelerometer with X, Y, Z axis acceleration and click detection.
In stock
Specifications
2- Operating Voltage
- 3V or 5V (I2C) / 3V (SPI)
- Dimensions
- Not specified
Pinout
6Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| SCL | I2C Clock | I2C | Used in I2C connection only |
| SDA | I2C Data | I2C | Used in I2C connection only |
| SCK | SPI Clock | SPI | Used in SPI connection only |
| MOSI | SPI Data Out | SPI | Used in SPI connection only |
| MISO | SPI Data In | SPI | Used in SPI connection only |
| CS | Chip Select | SPI | Used in SPI connection only |
Interactive pinout
Highlight:
CircuitPython
Click a pin to copy its name · tap a tag above to spotlight a bus.