← All parts
Joy Controller Feather
AdafruitAdafruit Feather M0 Express
A gamepad with a personality that operates as a USB HID controller.
In stock
Specifications
2- Operating Voltage
- 5V (USB) or 3.7V (Lipo battery)
- Gpio Count
- 8
Pinout
13Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 10 | TFT Display SCK | SPI | SCK from display to SCK on Adafruit Feather |
| 9 | TFT Display RST | GPIO | RST from display to 9 on Adafruit Feather |
| 6 | TFT Display DC | GPIO | DC from display to 6 on Adafruit Feather |
| 5 | TFT Display CCS | SPI | CCS from display to 5 on Adafruit Feather |
| 18 | Analog Thumb Joystick XOUT | ADC | XOUT from joystick to A1 on Adafruit Feather |
| 20 | Analog Thumb Joystick YOUT | ADC | YOUT from joystick to A0 on Adafruit Feather |
| 16 | Analog Thumb Joystick Sel | GPIO | Sel from joystick to 11 on Adafruit Feather |
| 28 | Button 4 | GPIO | Button 4 to A5 on Adafruit Feather |
| 26 | Button 3 | GPIO | Button 3 to A4 on Adafruit Feather |
| 25 | Button 2 | GPIO | Button 2 to A3 on Adafruit Feather |
| 22 | Button 1 | GPIO | Button 1 to A2 on Adafruit Feather |
| 14 | Switch Enable | GPIO | Switch to enable pin on Adafruit Feather |
| 13 | Switch GND | GND | Switch to GND pin on Adafruit Feather |
Interactive pinout
Highlight:
Adafruit Feather M0 Express
Click a pin to copy its name · tap a tag above to spotlight a bus.