← All parts
Lsm6Dsox And Ism330Dhc 6 Dof Imu
Adafruit
The LSM6DSOX and ISM330DHCX are 6-DOF IMUs with I2C and SPI interfaces, suitable for Arduino/C++ or CircuitPython/Python boards.
In stock
Specifications
6- Operating Voltage
- 3V to 5V DC input, with 3.3V output available for logic levels.
- Logic Level
- 3-5V
- Clock Speed
- 12.5 Hz to 6.7 KHz Hz
- Gpio Count
- 8 GPIO pins, including interrupt and address pins.
- Dimensions
- Breakout board dimensions not explicitly stated
- Connectivity
- I2C and SPI interfaces supported
Pinout
12| Pin | Name | Functions | Notes |
|---|---|---|---|
| Vin | Power | POWER | 3V to 5V input |
| 3Vo | 3.3V Output | — | Up to 100mA available |
| GND | Ground | GND | |
| SCL | I2C Clock | I2C | Level shifted for 3-5V logic |
| SDA | I2C Data | I2C | Level shifted for 3-5V logic, with 10K pullup |
| INT1 | Primary Interrupt Pin 1 | — | |
| INT2 | Primary Interrupt Pin 2 | — | |
| D0 (Bottom) | I2C Address | I2C | Changeable via solder jumper |
| SCK | SPI Clock | SPI | |
| DO (Bottom) | Serial Data Out / Microcontroller In Sensor Out | SPI | |
| SDX | Serial Data In / Microcontroller Out Sensor In | SPI | |
| CS (Bottom) | Chip Select | SPI |
Interactive pinout
Highlight:
BOARD
Click a pin to copy its name · tap a tag above to spotlight a bus.