← All parts
Make A Simple Debugging Featherwing For The M0
AdafruitM0
A debugging featherwing board for the Adafruit Feather M0, using SWD pins for JTAG programming.
In stock
Specifications
2- Operating Voltage
- 3.3V (typical) to 5.5V (max) V
- Logic Level
- TTL/CMOS compatible
Pinout
2Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 2 | SWCLK | GPIO | J-Link SWD [pin 4] |
| 3 | SWDIO | GPIO | J-Link SWD [pin 2] |
Interactive pinout
Highlight:
M0
Click a pin to copy its name · tap a tag above to spotlight a bus.