Micropython Hardware Pca9685 Dc Motor And Stepper Driver

Name: Micropython Hardware Pca9685 Dc Motor And Stepper Driver
Brand: Adafruit
Availability: InStock

AdafruitMicroPython

This guide explains how to use a PCA9685 motor driver with MicroPython on an Adafruit board, including installation steps and code examples.

In stock

Specifications

Operating Voltage: 5V DC (max) - 600mA per channel, total current draw is approximately 120mA at 3.3V and 80mA at 5V. DC
Logic Level: 3.3V or 5V logic level compatible. V

Pin	Name	Functions	Notes
1	GPIO	GPIO	Used for PWM control
2	GPIO	GPIO	Used for PWM control
3	GPIO	GPIO	Used for PWM control
4	GPIO	GPIO	Used for PWM control
5	GPIO	GPIO	Used for PWM control
6	GPIO	GPIO	Used for PWM control
7	GPIO	GPIO	Used for PWM control
8	GPIO	GPIO	Used as PWM channel 1
9	GPIO	GPIO	Used as PWM channel 2
10	GPIO	GPIO	Used for PWM control
11	GPIO	GPIO	Used for PWM control
12	GPIO	GPIO	Used as PWM channel 3
13	GPIO	GPIO	Used as PWM channel 4

Highlight:

MicroPython

Click a pin to copy its name · tap a tag above to spotlight a bus.