← All parts
Mlx90393 Wide Range 3 Axis Magnetometer
Adafruit
A wide-range 3-axis magnetometer with I2C interface, suitable for use on both 3.3V and 5V systems.
In stock
Specifications
9- Operating Voltage
- 3.3V to 5V
- Logic Level
- 3.3V or 5V
- Clock Speed
- Up to ~500 Hz Hz
- Flash
- N/A
- Ram
- N/A
- Gpio Count
- 6
- Dimensions
- Physical dimensions not specified.
- Connectivity
- I2C, 3.3V/5V power
- Usb
- N/A
Pinout
11| Pin | Name | Functions | Notes |
|---|---|---|---|
| VIN | Power Input | POWER | Connect to 3.3V or 5V depending on the system. |
| 3VO | 3.3V Output | POWER | Provides 3.3V for other components, up to 100mA. |
| GND | Ground | GND | Connect to the ground of your development board. |
| SCL | I2C Clock | I2C | Internal pull-up resistor present. |
| SDA | I2C Data | I2C | Internal pull-up resistor present. |
| INT | Interrupt | GPIO | Fires when a new data sample is read in single measurement mode. |
| A0, A1 | I2C Address Select | GPIO | Used to change the last two bits of the I2C address for multiple sensors. |
| CS (SENB) | Chip Select | GPIO | Not used on this breakout, provided for testing purposes only. |
| TR (INT/TRG) | Interrupt Trigger | GPIO | Optional interrupt pin, mirrors the INT pin when configured as such. |
| MIS (TRIG) | SPI MISO | GPIO | Not used on this breakout, provided for testing purposes only. |
| G | Ground | GND | Additional ground pin. |
Interactive pinout
Highlight:
BOARD
Click a pin to copy its name · tap a tag above to spotlight a bus.