← All parts
Adafruit Motor Shield V2
AdafruitArduino
The Adafruit Motor Shield V2 allows controlling DC and stepper motors via I2C communication.
In stock
Specifications
3- Operating Voltage
- 4.5-13.5VDC (for motors) / 5V or 3.3V (logic level) configurable via jumper
- Gpio Count
- 2 I2C pins, 4 DC motor ports, 2 stepper motor ports
- Connectivity
- I2C for motor control, separate power supply for motors and logic
Pinout
4Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 5 | SDA | I2C | Used for I2C communication with motors |
| 6 | SCL | I2C | Used for I2C communication with motors |
| 33 | GND | GND | Ground connection |
| 36 | 5V | POWER | Power supply for logic and servos |
Interactive pinout
Highlight:
Arduino
Click a pin to copy its name · tap a tag above to spotlight a bus.