← All parts
Multi Device Lora Temperature Network
AdafruitFeather M0 with RFM95 LoRa Radio
A board for collecting temperature, humidity, and pressure data using a BME280 sensor via LoRa radio to send the data to Adafruit IO or The Things Network.
In stock
Specifications
4- Operating Voltage
- 3.3V (Feather) / 5V (Raspberry Pi) - Adafruit recommends using a 3.3V tolerant power supply for the Feather and a 5V tolerant one for the Raspberry Pi.
- Flash
- Not specified
- Ram
- Not specified
- Gpio Count
- 4 I2C pins used for BME280, but no specific GPIO count mentioned.
Pinout
4| Pin | Name | Functions | Notes |
|---|---|---|---|
| 3V | 3V | POWER | Connected to BME280 VIN |
| GND | GND | GND | Connected to BME280 GND |
| SCL | SCL | I2C | Connected to BME280 SCK |
| SDA | SDA | I2C | Connected to BME280 SDI |
Interactive pinout
Highlight:
Feather M0 with RFM95 LoRa Radio
Click a pin to copy its name · tap a tag above to spotlight a bus.