← All parts
Programming Spi Flash Prom With An Ft232H Breakout
Adafruit
A guide on using an FT232H breakout board to program SPI flash memory from a computer.
In stock
Specifications
2- Operating Voltage
- 3.3V (regulated from 5V) - VCC, VSS=ground, regulated to 3.3V by L4931-3.3 regulator on FT232H breakout board.
- Logic Level
- 3.3V
Pinout
8| Pin | Name | Functions | Notes |
|---|---|---|---|
| 6 | D0 | SPI | MOSI |
| 5 | D1 | SPI | MISO |
| 2 | D2 | SPI | SCK |
| 1 | D4 | SPI | CS |
| 3 | Write Protect | — | POWER=3.3V |
| 4 | VSS | GND | |
| 7 | HOLD | — | POWER=3.3V |
| 8 | VCC | POWER | 3.3V |
Interactive pinout
Highlight:
BOARD
Click a pin to copy its name · tap a tag above to spotlight a bus.