← All parts
PyBadge
AdafruitATSAMD51J19
The Adafruit PyBadge is a credit card-sized development board featuring an ATSAMD51J19 microcontroller, a 1.8" color TFT display, and various gaming-oriented buttons and sensors. It supports CircuitPython, MakeCode Arcade, and Arduino for versatile project development.
In stock
Specifications
17- Mcu Model
- ATSAMD51J19 Cortex M4
- Clock Speed
- 120 MHz
- Operating Voltage
- 3.3 V
- Logic Level
- 3.3 V
- Flash Memory Mcu
- 512 KB
- Ram Mcu
- 192 KB
- Flash Memory Qspi
- 2 MB
- Display Type
- Color TFT
- Display Size
- 1.8 inches
- Display Resolution
- 160x128
- Buttons
- 8 buttons
- Sensors
- Light sensor, 3-axis accelerometer (LIS3DH)
- Audio Output
- Buzzer mini-speaker, Mono Class-D speaker driver
- Power Input
- LiPoly battery, Micro USB
- Connectivity
- Feather-compatible headers, 2x 3-pin STEMMA, 1x 4-pin STEMMA I2C
- Neopixels
- 5
- Dimensions
- 3 3/8 x 2 1/8 inches
Pinout
9| Pin | Name | Functions | Notes |
|---|---|---|---|
| — | A6 | ADC | Connected to a voltage divider for battery voltage sensing. |
| — | A7 | ADC | Ambient light sensor input, also known as board.LIGHT. |
| 8 | D8 | GPIOPWM | Controls 5 individually addressable RGB NeoPixel LEDs, also known as board.NEOPIXEL. |
| — | SCL | I2C | I2C clock line on the 4-pin STEMMA connector. VCC can be 5V (default) or 3V. |
| — | SDA | I2C | I2C data line on the 4-pin STEMMA connector. VCC can be 5V (default) or 3V. |
| — | VCC | POWER | Power output on STEMMA I2C connector, default 5V, configurable to 3V. |
| — | GND | GND | Ground on STEMMA I2C connector. |
| — | D2 | GPIOADCPWM | 3-pin JST digital or analog connector for sensors or NeoPixels. |
| — | D3 | GPIOADCPWM | 3-pin JST digital or analog connector for sensors or NeoPixels. |
Interactive pinout
Highlight:
ATSAMD51J19
Click a pin to copy its name · tap a tag above to spotlight a bus.