Pinouts
← All parts

Adafruit QT Py RP2040 W

AdafruitSAMD21E18

A small development board with a SAMD21 microcontroller, featuring I2C, UART, SPI, PWM, analog inputs, and an RGB NeoPixel.

In stock

Specifications

6
Operating Voltage
3.3V regulated, 5V USB input with diode protection (not recommended as a power source) [GND] 500mA peak through a diode, but recommend keeping it lower than that, about 500mA [3V] 500mA regulated output from the onboard regulator. V
Flash
256KB KB
Ram
32 KB KB
Gpio Count
11
Dimensions
Really, really small
Connectivity
Native USB supported by every OS - can be used in Arduino or CircuitPython as USB serial console, MIDI, Keyboard/Mouse HID, even a little disk drive for storing Python scripts.

Pinout

15
PinNameFunctionsNotes
3V3V
POWER
500mA regulated output
5V5V
POWER
1A peak through a diode, but recommend keeping it lower than that, about 500mA
GNDGND
GND
A0 / D0D0
GPIOPWMADC
True analog output with 10-bit precision, capacitive touch input
A1 / D1D1
GPIOPWMADC
Capacitive touch input or AREF pin
A2 / D2D2
GPIOPWMADC
Capacitive touch input or PWM output
A3 / D3D3
GPIOPWMADC
Capacitive touch input or PWM output
SDA / D4D4
I2C
Can also be a PWM pin, no analog on this pin!
SCL / D5D5
I2C
Can also be a PWM pin, no analog on this pin!
TX / A6 / D6D6
UART
Transmit (output) for Serial1, can act as PWM or capacitive touch input
RX / A7 / D7D7
UART
Receive (input) for Serial1, can act as PWM or capacitive touch input
SCK / A8 / D8D8
SPI
Hardware SPI clock pin, can also be a PWM output
MOSI / A9 / D9D9
SPI
Hardware SPI MISO microcontroller in serial out pin, can also be a PWM output
MISO / A10 / D10D10
SPI
Hardware SPI MOSI microcontroller out serial in pin, can also be a PWM output
NeoPixelD11
PWM
Connected to digital pin 11 for signal. Pin 12 controls the pixel's power.

Interactive pinout

Highlight:
SAMD21E18

Click a pin to copy its name · tap a tag above to spotlight a bus.