← All parts
Raspberry Pi Pico 2W
Raspberry PiRP2350
This board is a flexible, low-cost development platform featuring the RP2350 microcontroller. It includes a 2.4GHz wireless interface for Wi-Fi and Bluetooth, along with a micro USB port for power and data.
In stock
Specifications
20- Flash
- 4 MB
- Connectivity
- WiFi 4 (802.11n), Bluetooth 5.2
- Usb
- Micro USB B
- Dimensions
- 51mm x 21mm x 1mm
- Pin Pitch
- 2.54 mm
- Gpio Count
- 26
- Debug Interface
- 3-pin SWD
- Cpu Cores
- Dual Cortex-M33 or RISC-V Hazard3
- Clock Speed
- 150 MHz
- Ram
- 520 kB
- Usb Version
- 1.1
- Adc Resolution
- 12 bit
- Adc Sample Rate
- 500 ksps
- Peripherals
- 2x UART, 2x I2C, 2x SPI, 16x PWM channels
- Logic Level
- 3.3 V
- Operating Voltage Input Vsys
- 1.8-5.5 V
- Operating Voltage Vbus
- 5 V
- Operating Temperature Min
- -20 °C
- Operating Temperature Max
- 70 °C
- Max 3v3 Output Current
- 300 mA
Pinout
44| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | GND | GND | |
| 2 | GP0 | GPIOPWMUART | |
| 3 | GP1 | GPIOPWMUART | |
| 4 | GND | GND | |
| 5 | GP2 | GPIOPWMI2C | |
| 6 | GP3 | GPIOPWMI2C | |
| 7 | GP4 | GPIOPWMSPI | |
| 8 | GP5 | GPIOPWMSPI | |
| 9 | GND | GND | |
| 10 | GP6 | GPIOPWM | |
| 11 | GP7 | GPIOPWM | |
| 12 | GP8 | GPIOPWM | |
| 13 | GP9 | GPIOPWM | |
| 14 | GND | GND | |
| 15 | GP10 | GPIOPWM | |
| 16 | GP11 | GPIOPWM | |
| 17 | GP12 | GPIOPWM | |
| 18 | GP13 | GPIOPWM | |
| 19 | GND | GND | |
| 20 | GP14 | GPIOPWM | |
| 21 | GP15 | GPIOPWM | |
| 22 | GP16 | GPIOPWM | |
| 23 | GP17 | GPIOPWM | |
| 24 | GP18 | GPIOPWM | |
| 25 | GP19 | GPIOPWM | |
| 26 | GP20 | GPIOPWM | |
| 27 | GP21 | GPIOPWM | |
| 28 | GP22 | GPIOPWM | |
| 29 | GND | GND | |
| 30 | RUN | GPIO | RP2350 enable pin, short low to reset |
| 31 | GP26 | GPIOADCPWM | |
| 32 | GP27 | GPIOADCPWM | |
| 33 | AGND | GND | Analog ground reference for GPIO26-29 |
| 34 | GP28 | GPIOADCPWM | |
| 35 | ADC_VREF | ADCPOWER | ADC power supply and reference voltage |
| 36 | 3V3 | POWER | Main 3.3V supply, max 300mA output to external circuitry |
| 37 | 3V3_EN | GPIOPOWER | SMPS enable pin, pull low to disable 3.3V |
| 38 | GND | GND | |
| 39 | VSYS | POWER | Main system input voltage, 1.8V to 5.5V |
| 40 | VBUS | POWER | Micro-USB input voltage, nominally 5V |
| TP1 | GND | GND | |
| TP2 | USB DM | USB | |
| TP3 | USB DP | USB | |
| TP6 | BOOTSEL | GPIO | Short low at power-up for USB mass storage programming mode |
Interactive pinout
Highlight:
RP2350
Click a pin to copy its name · tap a tag above to spotlight a bus.