← All parts
Repaper Eink Development Board Arm Linux Raspberry Pi Beagle Bone Black
AdafruitARM
A development board for Raspberry Pi or BeagleBone Black with an eInk display, featuring GPIO pins broken out to a header.
In stock
Specifications
2- Operating Voltage
- 3V (level shifted for 5V compatibility)
- Dimensions
- Not explicitly stated
Pinout
13Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 01 | 3.3v | POWER | Red wire |
| 23 | P1-23 | GPIO | Yellow wire |
| 22 | P1-22 | GPIO | Orange wire |
| 12 | P1-12 | GPIO | Brown wire |
| 18 | P1-18 | GND | Black wire |
| 16 | P1-16 | GPIO | Red wire #2 |
| 10 | P1-10 | GND | White wire |
| 08 | P1-08 | GPIO | Grey wire |
| 21 | P1-21 | GPIO | Purple wire |
| 19 | P1-19 | GPIO | Blue wire |
| 26 | P1-26 | GPIO | Orange wire #2 |
| 24 | P1-24 | GND | Brown wire #2 |
| 25 | P1-25 | GPIO | Black wire #2 |
Interactive pinout
Highlight:
ARM
Click a pin to copy its name · tap a tag above to spotlight a bus.