← All parts
Rgb Hsv Neopixel Dialer
AdafruitFeather M0 Express
A board with a Feather M0 Express microcontroller, used for controlling NeoPixels and an LCD screen via potentiometers.
In stock
Specifications
4- Operating Voltage
- 5V (USB) or 3.3V (external power)
- Logic Level
- 3.3V
- Dimensions
- Not specified
- Connectivity
- USB (for power and programming)
Pinout
10Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| A0 | potR | ADC | Red value |
| A1 | potG | ADC | Green value |
| A2 | potB | ADC | Blue value |
| D5 | lcd_rs | GPIO | LCD register select |
| D6 | lcd_en | GPIO | LCD enable |
| D9 | lcd_d4 | GPIO | LCD data 4 |
| D10 | lcd_d5 | GPIO | LCD data 5 |
| D11 | lcd_d6 | GPIO | LCD data 6 |
| D12 | lcd_d7 | GPIO | LCD data 7 |
| D13 | pixpin | PWM | NeoPixel data pin |
Interactive pinout
Highlight:
Feather M0 Express
Click a pin to copy its name · tap a tag above to spotlight a bus.