← All parts
Rgb Matrix Panels With Raspberry Pi 5
AdafruitRaspberry Pi 5
A board for creating RGB matrix displays using a Raspberry Pi 5 with Adafruit's RGB Matrix Bonnet or HAT.
In stock
Specifications
2- Operating Voltage
- 5V (DC) - 4A max power supply required for multiple panels. V
- Gpio Count
- 14
Pinout
13Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 3 | GPIO21 | GPIO | Not part of the bus |
| 6 | GPIO13 | GPIO | Not part of the bus |
| 11 | GPIO17 | GPIO | Not part of the bus |
| 13 | GPIO27 | GPIO | Not part of the bus |
| 14 | GPIO22 | GPIO | Not part of the bus |
| 16 | GPIO23 | GPIO | Not part of the bus |
| 19 | GPIO4 | GPIO | Not part of the bus |
| 20 | GPIO5 | GPIO | Not part of the bus |
| 22 | GPIO6 | GPIO | Not part of the bus |
| 27 | GPIO12 | GPIO | Not part of the bus |
| 28 | GPIO16 | GPIO | Not part of the bus |
| 34 | GPIO24 | GPIO | Not part of the bus |
| 38 | GPIO19 | GPIO | Not part of the bus |
Interactive pinout
Highlight:
Raspberry Pi 5
Click a pin to copy its name · tap a tag above to spotlight a bus.