← All parts
ADS1120 16-bit ADC
ADS1120
Texas Instrumentsic data converter
The ADS1120 is a 16-bit ADC with programmable gain and data rates up to 2kSPS, designed for small sensor signal measurements.
In stock
Specifications
8- Operating Voltage
- 2.3V to 5.5V
- Supply Current
- 120μA (typ) in duty-cycle mode
- Interface
- SPI (mode 1)
- Resolution
- 16 bits
- Range
- -VREF / Gain to VREF / Gain V
- Accuracy
- ±0.1% (gain = 1 to 128, TA = 25°C)
- Temperature Range
- -40°C to +125°C
- Package
- VQFN-16 or TSSOP-16
Pinout
16| Pin | Name | Functions | Notes |
|---|---|---|---|
| AIN0/REFP1 | Analog input 0, positive reference input 1 | GPIO | |
| AIN1 | Analog input 1 | GPIO | |
| AIN2 | Analog input 2 | GPIO | |
| AIN3/REFN1 | Analog input 3, negative reference input 1. Internal low-side power switch connected between AIN3/REFN1 and AVSS. | GPIO | |
| AVDD | Positive analog supply | POWER | Connect a 100nF (or larger) capacitor to AVSS. |
| AVSS | Negative analog supply | GND | |
| CLK | External clock source pin | GPIO | Connect to DGND if not used. |
| CS | Chip select; active low | GPIO | Connect to DGND if not used. |
| DGND | Digital supply ground | GND | |
| DIN | Serial data input | GPIO | |
| DOUT/DRDY | Serial data output combined with data ready; active low | GPIO | |
| DRDY | Data ready, active low. Leave unconnected or tie to DVDD using a weak pullup resistor if not used. | GPIO | |
| DVDD | Positive digital power supply | POWER | Connect a 100nF (or larger) capacitor to DGND. |
| REFN0 | Negative reference input 0 | GPIO | |
| REFP0 | Positive reference input 0 | GPIO | |
| SCLK | Serial clock input | GPIO |
Interactive pinout
Highlight:
ADS1120
Click a pin to copy its name · tap a tag above to spotlight a bus.