PinoutSearch
← All parts

HD44780 LCD Controller

HD44780

Hitachidisplay

HD44780 LCD Controller is a dot-matrix liquid crystal display controller that can drive up to two lines of 8 characters or one line of 16 characters, interfaced with a microprocessor through 4- or 8-bit buses.

In stock

Specifications

7
Operating Voltage
2.7V to 5.5V
Interface
4- or 8-bit microprocessor interface
Resolution
Not applicable (character-based display)
Range
16-character × 2-line or 8-character × 1-line display
Accuracy
Not applicable (character-based display)
Temperature Range
Not specified in the datasheet
Package
FP-80B or TFP-80F

Pinout

14
PinNameFunctionsNotes
RSRegister Select
GPIO
Selects registers (0: Instruction register, 1: Data register)
R/WRead/Write
GPIO
Selects read or write operation
EEnable
GPIO
Starts data read/write
DB4 to DB7Data Bus (High Order)
GPIO
Four high order bidirectional tristate data bus pins for 4- or 8-bit operation
DB0 to DB3Data Bus (Low Order)
GPIO
Four low order bidirectional tristate data bus pins for 4- or 8-bit operation
CL1Clock to Latch Serial Data D
GPIO
Clock to latch serial data D sent to the extension driver
CL2Clock to Shift Serial Data D
GPIO
Clock to shift serial data D
MSwitch Signal for AC Waveform Conversion
GPIO
Switch signal for converting the liquid crystal drive waveform to AC
DCharacter Pattern Data
GPIO
Character pattern data corresponding to each segment signal
COM1 to COM16Common Signals
GPIO
Common signals for the liquid crystal display, with non-selection waveforms at 1/8 and 1/11 duty factors
SEG1 to SEG40Segment Signals
GPIO
Segment signals for the liquid crystal display
V1 to V5Power Supply
POWER
Power supply for LCD drive, with a maximum of 11V (VCC - V5)
VCCSupply Voltage
POWER
2.7V to 5.5V
GNDGround
GND
0V ground reference

Interactive pinout

Highlight:
HD44780

Click a pin to copy its name · tap a tag above to spotlight a bus.