← All parts
LP2950 LDO
LP2950
Texas Instrumentspower regulator
The LP2950 is a low-dropout linear regulator that provides stable output voltages from an input supply and can be used in battery-powered systems.
In stock
Specifications
5- Operating Voltage
- 2.3 V to 30 V
- Supply Current
- 75 µA typical
- Output Voltage
- 3 V, 3.3 V, or 5 V (depending on version) V
- Dropout Voltage
- 40 mV at light loads and 380 mV at 100 mA mV
- Temperature Range
- -40°C to 125°C (typical)
Pinout
4Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| IN | Input supply voltage | POWER | |
| OUT | Regulated output voltage | POWER | |
| SHUTDOWN | Disable device | GPIO | |
| GND | Ground | GND |
Interactive pinout
Highlight:
LP2950
Click a pin to copy its name · tap a tag above to spotlight a bus.
Related parts
6Related chips
- 1.2 V to 37 V Positive Adjustable Voltage Regulators1872
- 100-mA, negative linear voltage regulator100-mA, negative linear voltage regulato
- 60V Single N-Channel HEXFET Power MOSFET1882
- AMS1117 LDO RegulatorAMS1117 · Advanced Monolithic
- IC REG LINEAR 3.3V 500MA TO220-3IC REG LINEAR 3.3V 500MA TO220-3
- IC REG LINEAR 5V 1.5A TO220-3IC REG LINEAR 5V 1.5A TO220-3