← All parts
RELAY GEN PURPOSE 4PDT 2A 48V
RELAY GEN PURPOSE 4PDT 2A 48V
relay
This is a general-purpose relay with 4 poles and double throw (4PDT) configuration, rated for 2A current and 48V DC. It supports single-side stable and 2-coil latching operation modes.
In stock
Specifications
15- Operating Voltage
- DC 1.5, 3, 5, 6, 9, 12, 24, 48 V
- Contact Arrangement
- 1 Form C, 2 Form C, 4 Form C
- Nominal Operating Power
- Single side stable: 400 mW; Latching: 360 mW (M type); Single side stable: 200 mW; Latching: 180 mW (S type)
- Contact Resistance
- Max. 50 mΩ
- Switching Capacity
- 2 A, 30 V DC
- Max Switching Power
- 60 W, 125 VA
- Max Switching Voltage
- 220 V DC, 250 V AC
- Carrying Current
- 3 A
- Initial Contact Resistance
- Max. 50 mΩ
- Insulation Resistance
- Min. 100 MΩ (at 500 V DC)
- Breakdown Voltage
- Between open contacts: 1,000 Vrms for 1 min; Between contact and coil: 1,500 Vrms for 1 min
- Temperature Rise
- Max. 65°C (by resistive method)
- Operate Time
- Max. 10 ms
- Release Time
- Max. 5 ms [10 ms]
- Package
- Miniature relay
Pinout
14Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | COM1 | GPIO | Common terminal for pole 1 |
| 2 | NO1 | GPIO | Normally open contact for pole 1 |
| 3 | COM2 | GPIO | Common terminal for pole 2 |
| 4 | NO2 | GPIO | Normally open contact for pole 2 |
| 5 | COM3 | GPIO | Common terminal for pole 3 |
| 6 | NO3 | GPIO | Normally open contact for pole 3 |
| 7 | COM4 | GPIO | Common terminal for pole 4 |
| 8 | NO4 | GPIO | Normally open contact for pole 4 |
| 9 | NC1 | GPIO | Normally closed contact for pole 1 |
| 10 | NC2 | GPIO | Normally closed contact for pole 2 |
| 11 | NC3 | GPIO | Normally closed contact for pole 3 |
| 12 | NC4 | GPIO | Normally closed contact for pole 4 |
| 13 | L1 | PWMI2C | Coil terminal for latching relay 1 |
| 14 | L2 | PWMI2C | Coil terminal for latching relay 2 |
Interactive pinout
Highlight:
RELAY GEN PURPOSE 4PDT 2A 48V
Click a pin to copy its name · tap a tag above to spotlight a bus.