← All parts
STM32F401CC
STM32F401CC
Microcontroller
The STM32F401CC is a microcontroller with an Arm Cortex-M4 core, featuring multiple communication interfaces and ADCs.
In stock
Specifications
3- Operating Voltage
- 1.7 V to 3.6 V (VDD/VIN) @ -40 °C to 85/105/125 °C (Tamb) temperature range.
- Supply Current
- Run: 128 µA/MHz (peripheral off), Stop (Flash in Stop mode, fast wakeup time): 42 µA typ @ 25 °C; 65 µA max @25 °C, Stop (Flash in Deep power down mode, slow wakeup time): down to 10 µA typ@ 25 °C; 28 µA max @25 °C, Standby: 2.4 µA @25 °C / 1.7 V without RTC; 12 µA @85 °C @1.7 V, VBAT supply for RTC: 1 µA @25 °C.
- Interface
- I2C (up to 3), USART (up to 3), SPI (up to 4), ADC (12-bit, 2.4 MSPS)
Pinout
11Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| PA0 | GPIO | GPIO | General-purpose input/output |
| PA1 | I2C1_SCL | I2C | Serial clock line for I2C interface 1 |
| PA2 | I2C1_SDA | I2C | Serial data line for I2C interface 1 |
| PA3 | USART1_TX | UART | Transmit data for USART 1 |
| PA4 | USART1_RX | UART | Receive data for USART 1 |
| PA5 | SPI1_SCK | SPI | Serial clock line for SPI interface 1 |
| PA6 | SPI1_MISO | SPI | Master in, slave out for SPI interface 1 |
| PA7 | SPI1_MOSI | SPI | Master out, slave in for SPI interface 1 |
| PB0 | USART2_TX | UART | Transmit data for USART 2 |
| PB1 | USART2_RX | UART | Receive data for USART 2 |
| PC0 | ADC1_IN0 | ADC | Analog-to-digital converter input channel 0 |
Interactive pinout
Highlight:
STM32F401CC
Click a pin to copy its name · tap a tag above to spotlight a bus.