← All parts
TPS63060 Buck-Boost
TPS63060
Texas Instrumentspower regulator
The TPS63060 is a high input voltage, buck-boost converter that can operate with an input range of 2.5V to 12V and provide up to 2A output current in buck mode or 1.3A in boost mode.
In stock
Specifications
8- Operating Voltage
- VIN: 2.5V to 12V, VOUT: 2.5V to 8V
- Supply Current
- IQ = 30μA (IOUT = 0mA, VEN = VIN = 5V, VOUT = 5V) μA
- Interface
- GPIO: EN, PS/SYNC; POWER: PG, GND, VAUX, VIN, VOUT
- Resolution
- Not specified
- Range
- Output current: 1A to 2A (buck mode), 0.63% to 5% duty cycle, 495mV to 505mV feedback voltage
- Accuracy
- Load regulation: 0.5%, Line regulation: 0.5% %
- Temperature Range
- -40°C to 125°C (operating), -65°C to 150°C (storage)
- Package
- WSON (DSC) 3.00mm × 3.00mm, 10 pins
Pinout
10| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | L1 | GPIO | Connection for inductor |
| 2 | VIN | POWER | Supply voltage for power stage |
| 3 | EN | GPIO | Enable input (1 enabled, 0 disabled) |
| 4 | PS/SYNC | GPIO | Enable / disable power save mode (1 disabled, 0 enabled, clock signal for synchronization) |
| 5 | PG | GND | Output power good (1 good, 0 failure, open drain) |
| 6 | VAUX | GPIO | Connection for capacitor |
| 7 | GND | GND | Control and logic ground |
| 8 | FB | GPIO | Voltage feedback of adjustable versions, must be connected to VOUT on fixed output voltage versions |
| 9 | VOUT | POWER | Buck-boost converter output |
| 10 | L2 | GPIO | Connection for inductor |
Interactive pinout
Highlight:
TPS63060
Click a pin to copy its name · tap a tag above to spotlight a bus.