Op-Amp & Amplifier

INA128 · Texas Instruments

INA128 is a precision, low-power instrumentation amplifier with high common-mode rejection and low offset voltage, designed for applications requiring accurate analog signal conditioning.

INA129 · Texas Instruments

INA129 is a precision, low-power instrumentation amplifier with high common-mode rejection and low offset voltage, designed for applications requiring accurate analog signal conditioning.

INA180 · Texas Instruments

INA180 is a single-channel current-sense amplifier designed for cost-optimized applications, capable of sensing voltage drops across current-sense resistors with high accuracy and low offset drift.

INA181 · Texas Instruments

INA181 is a single-channel current-sense amplifier with bidirectional sensing capability, operating from 2.7V to 5.5V supply voltage.

INA190 · Texas Instruments

INA190 is a precision current-sense amplifier used for overcurrent protection and system optimization, with low input bias currents and wide common-mode voltage range.

INA199 · Texas Instruments

INA199 is a bidirectional, zero-drift current-sense amplifier with gains of 50 V/V, 100 V/V, or 200 V/V for measuring shunt resistor drops across common-mode voltages from -0.3V to 26V.

INA240 · Texas Instruments

The INA240 is a current-sense amplifier with enhanced PWM rejection, designed for precise current measurement over a wide common-mode range from -4V to 80V.

INA333 · Texas Instruments

The INA333 is a low-power, precision instrumentation amplifier designed for portable applications with features like low offset voltage and high common-mode rejection ratio.

LF353 · Texas Instruments

The LF353 is a dual JFET op-amp with low input bias current, high slew rate, and wide bandwidth, suitable for applications requiring high-speed integrators, digital-to-analog converters, and sample-and-hold circuits.

LF356 · Texas Instruments

The LF356 is a JFET op-amp designed for high-speed integrations, fast D/A and A/D converters, and wideband, low-noise applications.

LM2902 · Texas Instruments

The LM2902 is a quad operational amplifier designed for high-voltage applications, providing low input offset voltage and common-mode rejection.

LM2903 · Texas Instruments

The LM2903 is a dual comparator from Texas Instruments, used for comparing voltages and generating digital outputs based on the comparison.

LM311 · Texas Instruments

The LM311 is a single high-speed voltage comparator with a 165ns response time. It runs from a wide supply range (single 5V to dual +/-15V), offers strobe and offset-balance pins, and switches up to 50V at 50mA.

LM318 · Texas Instruments

The LM318 is a high-speed operational amplifier designed for wide bandwidth and high slew rate applications.

LM324 · Texas Instruments

The LM324 contains four independent high-voltage operational amplifiers in one package. It runs from a single 3V to 36V supply (or split supplies), with a common-mode input range that includes ground and low quiescent current, ideal for single-supply designs.

LM339 · Texas Instruments

The LM339 contains four independent voltage comparators that operate from a single 2V to 36V supply. Its common-mode input range includes ground, and the open-collector outputs are compatible with TTL, MOS and CMOS logic.

LM348 · Texas Instruments

The LM348 is a quad op-amp designed for high-gain, internally compensated amplification with low supply current and input bias currents.

LM358 · Texas Instruments

The LM358 is an industry-standard dual operational amplifier that operates from a single 3 V to 36 V supply. Its common-mode input range includes ground, making it well suited to single-supply, near-ground sensing applications.

LM360 · Texas Instruments

The LM360 is a high-speed differential comparator with complementary TTL outputs, designed for use in analog-to-digital conversion and zero-crossing detection.

LM386 · Texas Instruments

The LM386 is a low-voltage mono audio power amplifier for battery-powered applications. Its gain is internally set to 20 but can be raised to 200 with an external resistor and capacitor, while ground-referenced inputs minimize external parts.

LM393 · Texas Instruments

The LM393 contains two independent voltage comparators that run from a single 2 V to 36 V supply. Its common-mode range includes ground and the open-collector outputs are compatible with TTL, MOS, and CMOS logic.

LM393B · Texas Instruments

The LM393B is a dual comparator with low input offset voltage and high supply voltage capability, designed for use in various applications including vacuum robots and server power supplies.

LM397 · Texas Instruments

The LM397 Comparator is a single voltage comparator designed for industrial applications with wide supply voltage range and low power consumption.

LM741 · Texas Instruments

LM741 is a general-purpose operational amplifier with overload protection, suitable for integrator, summing amplifier, and feedback applications.

LM833 · Texas Instruments

The LM833 is a dual high-speed audio operational amplifier designed for use in audio and data-signal applications, featuring low noise voltage and high gain bandwidth product.

LME49720 · Texas Instruments

The LME49720 is a dual high-performance audio operational amplifier designed for ultra-high quality audio amplification and high-fidelity applications, with low distortion and noise characteristics.

LMV321 · Texas Instruments

The LMV321 is a low-voltage rail-to-rail op-amp with applications in various electronic devices, offering high performance at low voltages.

LMV324 · Texas Instruments

The LMV324 is a quad low-voltage rail-to-rail op-amp designed for applications requiring low-voltage operation and space-saving solutions.

LMV339 · Texas Instruments

The LMV339 is a quad comparator with low supply current and operates from 2.7V to 5.5V, suitable for portable consumer products.

LMV358 · Texas Instruments

The LMV358 is a dual RRO op-amp designed for low-voltage (2.7 V to 5 V) applications, providing rail-to-rail output swing and operating from -40°C to +125°C.

LMV393 · Texas Instruments

The LMV393 is a dual comparator with low supply current and operates from 2.7V to 5.5V, suitable for portable consumer products.

MCP6004 · Microchip

The MCP6004 is a quad op-amp designed for general-purpose applications with low power consumption and wide bandwidth, suitable for battery-powered systems.

NE5534 · Texas Instruments

NE5534 is a high-performance audio op-amp with low noise, high output drive capability, and wide supply voltage range.

OPA1656 · Texas Instruments

The OPA1656 is a high-performance audio operational amplifier designed for professional and industrial applications, offering ultra-low noise and distortion.

OPA177 · Texas Instruments

The OPA177 is a precision operational amplifier with low offset voltage and drift, suitable for high-precision analog applications.

OPA192 · Texas Instruments

The OPA192 is a precision operational amplifier designed for high-voltage industrial applications, offering low offset voltage and drift, wide bandwidth, and rail-to-rail input/output capabilities.

OPA2134 · Texas Instruments

The OPA2134 is a dual-channel audio operational amplifier designed for professional audio applications, offering low distortion and high speed.

OPA2320 · Texas Instruments

The OPA2320 is a dual RRIO op-amp with low noise, high CMRR, and wide supply voltage range, suitable for precision signal conditioning applications.

OPA2333 · Texas Instruments

The OPA2333 is a dual zero-drift operational amplifier with low offset voltage and drift, suitable for precision applications.

OPA2340 · Texas Instruments

The OPA2340 is a dual rail-to-rail operational amplifier designed for low-voltage single-supply operation with high bandwidth and low quiescent current.

OPA2991 · Texas Instruments

The OPA2991 is a dual rail-to-rail input/output operational amplifier with low offset voltage and high precision for industrial applications.

OPA320 · Texas Instruments

The OPA320 is a precision, low-noise RRIO operational amplifier with wide bandwidth and unity-gain stability, suitable for sensor signal conditioning and ADC driving.

OPA333 · Texas Instruments

The OPA333 is a zero-drift operational amplifier designed for low offset voltage and drift, with high precision in single-supply applications.

OPA336 · Texas Instruments

The OPA336 is a micropower operational amplifier designed for battery-powered applications, operating on a single supply with low quiescent current and rail-to-rail output.

OPA340 · Texas Instruments

The OPA340 is a rail-to-rail operational amplifier designed for low-voltage single-supply operation with high bandwidth and low quiescent current.

OPA365 · Texas Instruments

The OPA365 is a high-performance operational amplifier designed for applications requiring low distortion and high common-mode rejection in single-supply configurations.

OPA551 · Texas Instruments

OPA551 is a high-voltage operational amplifier designed for telephony, audio, servo, and test applications, featuring wide supply range, high slew rate, and low noise.

OPA627 · Texas Instruments

The OPA627 is a precision operational amplifier with low noise and high speed, suitable for applications requiring accurate signal amplification.

OPA991 · Texas Instruments

The OPA991 is a high-voltage operational amplifier with rail-to-rail input/output capabilities, designed for precision analog signal processing in industrial applications.

TL062 · Texas Instruments

The TL062 is a low-power JFET op-amp designed for use in tablets, white goods, and personal electronics. It features high input impedance and wide common-mode voltage ranges.

TL071 · Texas Instruments

The TL071 is a JFET op-amp with low noise, high slew rate, and low offset voltage, suitable for audio and power applications.

TL074 · Texas Instruments

The TL074 is a quad low-noise JFET-input operational amplifier offering high slew rate, low offset voltage, and wide supply range. It suits audio, filtering, and general-purpose analog signal-conditioning circuits.

TL081 · Texas Instruments

The TL081 is a JFET op-amp with high slew rate and low offset voltage, suitable for various applications including solar energy systems and audio mixers.

TL082 · Texas Instruments

The TL082 is a dual JFET op-amp with high slew rate and low offset voltage, suitable for various applications including solar energy systems and motor drives.

TL084 · Texas Instruments

The TL084 is a quad JFET op-amp with high slew rate and low offset voltage, designed for use in various applications including solar energy systems and motor drives.

TLC272 · Texas Instruments

The TLC272 is a precision dual operational amplifier with low input offset voltage and high input impedance, suitable for applications requiring precise amplification.

TLC274 · Texas Instruments

The TLC274 is a quad CMOS operational amplifier with high input impedance and low noise, suitable for precision applications.

TLV2372 · Texas Instruments

The TLV2372 is a rail-to-rail input and output operational amplifier with high bandwidth, low power consumption, and shutdown mode.

TLV2374 · Texas Instruments

The TLV2374 is a quad rail-to-rail input and output operational amplifier with high slew rate, wide bandwidth, and low supply current.

TLV3201 · Texas Instruments

The TLV3201 is a high-speed, low-power comparator with push-pull outputs, suitable for applications requiring fast response times and low power consumption.

TLV3501 · Texas Instruments

The TLV3501 is a fast comparator with rail-to-rail inputs and outputs, operating from 2.7V to 5.5V, designed for high-speed applications like automatic test equipment and wireless base stations.

TLV9002 · Texas Instruments

The TLV9002 is a dual RRIO op-amp designed for low-cost applications, providing rail-to-rail input and output with unity-gain bandwidth of 1 MHz.

TLV9004 · Texas Instruments

The TLV9004 is a quad RRIO op-amp designed for low-cost applications, offering rail-to-rail input and output with unity-gain bandwidth of 1 MHz.

TLV9062 · Texas Instruments

The TLV9062 is a dual-channel low-voltage operational amplifier with rail-to-rail input and output capabilities, designed for cost-sensitive systems.