Logic IC

74LVC14 · Texas Instruments

The 74LVC14 is a hex Schmitt inverter designed for digital signal processing, operating from 1.65V to 3.6V.

74LVC157 · Texas Instruments

The 74LVC157 is a quad 2-to-1 multiplexer that selects between two data sources based on address inputs, operating from 1.65V to 3.6V.

74LVC158 · Texas Instruments

The SN74LVC158 is a quad 2-to-1 multiplexer that selects between two data sources based on the select inputs and outputs the chosen data.

74LVC165 · Texas Instruments

The SN74LVC165 is an 8-bit parallel-load shift register that supports data shifting and loading via serial or parallel interfaces, with high push-pull output drive strength.

74LVC166 · Texas Instruments

The SN74LVC166 is an 8-bit parallel-load shift register with high push-pull output drive strength and supports partial-power-down.

74LVC240 · Texas Instruments

The SN74LVC240 is an octal buffer/driver with 3-state outputs, designed for mixed-mode signal operation from 1.65V to 3.6V.

74LVC241 · Texas Instruments

The SN74LVC241 is an octal buffer with 3-state outputs designed for use in digital circuits to drive or hold signals during controller resets and other applications.

74LVC244 · Texas Instruments

The SN74LVC244A is an octal buffer or driver with 3-state outputs, designed for asynchronous communication between data buses and operating from 1.65V to 3.6V.

74LVC245 · Texas Instruments

74LVC245 is an octal bus transceiver designed for asynchronous communication, capable of translating data from A to B or vice versa based on DIR input and can be used in mixed 3.3V/5V systems.

74LVC257 · Texas Instruments

The 74LVC257 is a quad 2-to-1 multiplexer designed for 1.65V to 3.6V operation, used in data selection and bus organization systems.

74LVC258 · Texas Instruments

The SN74LVC258 is a quad 2-to-1 multiplexer with inverted outputs, used for data selection and multiplexing applications.

74LVC32 · Texas Instruments

The 74LVC32 is a quad 2-input positive-OR gate IC that operates from 1.65V to 3.6V, with inputs tolerant up to 5.5V.

74LVC373 · Texas Instruments

The 74LVC373 is an octal transparent D-type latch that operates from 1.65V to 3.6V, with enable and output-enable pins to control data latching and bus driving.

74LVC374 · Texas Instruments

A 8-bit octal D flip-flop that operates from 1.65V to 3.6V, with enable control and clock input.

74LVC540 · Texas Instruments

The SN54LVC540A is an octal buffer/driver with 3-state outputs, designed to operate from 1.65V to 3.6V and support mixed-mode signal operation.

74LVC541 · Texas Instruments

The SN74LVC541A octal buffer/driver is designed for mixed-mode signal operation and supports 3-state outputs, operating from 1.65V to 3.6V VCC.

74LVC573 · Texas Instruments

The SN74LVC573A and SN54LVC573A are octal transparent D-type latches designed for data retention and latching, with 3-state outputs suitable for driving bus lines. They operate from 1.65V to 3.6V VCC.

74LVC574 · Texas Instruments

The SN54LVC574A and SN74LVC574A are octal edge-triggered D-type flip-flops with 3-state outputs, designed for driving capacitive loads. They feature GPIO pins for data (D), clock (CLK), output enable (OE), power supply (VCC), ground (GND), and other control signals.

74LVC595 · Texas Instruments

The SN74LVC595 is an 8-bit shift register with 3-state outputs, used in network switches and LED displays.

74LVC74 · Texas Instruments

The 74LVC74 Dual D Flip-Flop is a digital logic IC designed for data storage with two independent positive-edge triggered flip-flops, operating in the voltage range of 1.65V to 3.6V.

74LVC86 · Texas Instruments

The SN54LVC86A is a quad 2-input exclusive-OR gate designed to operate from 1.65V to 3.6V, with inputs and outputs that can tolerate voltages up to 5.5V.

CD4001B · Texas Instruments

The CD4001 is a quad NOR gate IC that provides basic digital logic functions.

CD4002B · Texas Instruments

The CD4002 is a dual 4-input NOR gate IC designed for digital logic applications.

CD40107BE

The CD40107B is a dual 2-input CMOS NAND buffer/driver with open-drain outputs, suitable for driving relays and LEDs.