PinoutSearch

DisplayPort Pinout

VESA's 20-pin digital A/V interface using packetized main-link lanes and an AUX channel.

Overview

The full-size DisplayPort connector has 20 pins carrying up to four Main Link (ML) differential lanes, a bidirectional AUX channel, hot-plug detect, and a 3.3V power pin. Video and audio are sent as micro-packets over the main link rather than as separate RGB lines.

This pinout is for the source-side (plug) connector; on the sink side the lane order is reversed (lane 0 and lane 3 swap positions). Pin 20 (DP_PWR) supplies 3.3V/500mA but must be left unconnected on passive DP-to-DP cables.

Pinout

PinNameFunctionDescription
1ML_Lane 0+PAIRMain link lane 0, positive
2GNDGND / PAIRGround (lane 0 return/shield)
3ML_Lane 0-PAIRMain link lane 0, negative
4ML_Lane 1+PAIRMain link lane 1, positive
5GNDGND / PAIRGround (lane 1 return/shield)
6ML_Lane 1-PAIRMain link lane 1, negative
7ML_Lane 2+PAIRMain link lane 2, positive
8GNDGND / PAIRGround (lane 2 return/shield)
9ML_Lane 2-PAIRMain link lane 2, negative
10ML_Lane 3+PAIRMain link lane 3, positive
11GNDGND / PAIRGround (lane 3 return/shield)
12ML_Lane 3-PAIRMain link lane 3, negative
13CONFIG1GNDConfiguration / cable-adapter detect (to GND)
14CONFIG2GNDConfiguration / cable-adapter detect (to GND)
15AUX_CH+SIGNALAuxiliary channel, positive (EDID/DPCD/link mgmt)
16GNDGNDGround (AUX return/shield)
17AUX_CH-SIGNALAuxiliary channel, negative
18Hot Plug DetectAUDIOHot-plug / interrupt detection
19Return (DP_PWR GND)POWER / GNDReturn/ground for DP_PWR
20DP_PWRPOWER+3.3V, up to 500mA (open on passive cables)

Notes

  • Sink-side connectors reverse lane order (lane 0 and lane 3 swap).
  • Passive DP-to-DP cables must leave pin 20 (DP_PWR) unconnected per DP 1.1+.

Reference: VESA DisplayPort Standard / PinoutGuide DisplayPort· verified 2026-06-27