← All parts
E Ink Bonnet For Raspberry Pi
AdafruitRaspberry Pi
The Adafruit E-Ink Bonnet for Raspberry Pi is an add-on board that facilitates the use of e-paper displays with a Raspberry Pi. It includes SPI and I2C interfaces, buttons, and a speaker.
In stock
Specifications
4- Operating Voltage
- 3.3V (I2C, SPI, GPIO) / 5V (speaker) / 12V (MAX98357)
- Logic Level
- TTL
- Dimensions
- Not specified
- Connectivity
- SPI, I2C, GPIO
Pinout
8| Pin | Name | Functions | Notes |
|---|---|---|---|
| 24 | MOSI/MISO/SCK | SPI | Connected to default SPI port on the Raspberry Pi |
| 18 | BCLK | GPIO | Used for I2S audio |
| 19 | LRCLK | GPIO | Used for I2S audio |
| 21 | DIN | GPIO | Used for I2S audio |
| 5 | GPIO 5 | GPIO | Connected to a button |
| 6 | GPIO 6 | GPIO | Connected to another button |
| 27 | GPIO 27 | GPIO | Connected to the reset pin of the E-Paper display |
| 17 | GPIO 17 | GPIO | Connected to the busy pin of the E-Paper display |
Interactive pinout
Highlight:
Raspberry Pi
Click a pin to copy its name · tap a tag above to spotlight a bus.