← All parts
Adafruit DRV8833 Motor Driver
AdafruitN/A
A motor driver board with two H-bridges to drive DC or stepper motors, featuring built-in current limiting and polarity protection.
In stock
Specifications
3- Operating Voltage
- 2.7V-10.8V (motor power) / 2.7V or higher (logic power)
- Logic Level
- 2.7V or higher
- Gpio Count
- 4
Pinout
7| Pin | Name | Functions | Notes |
|---|---|---|---|
| VMotor | Vmotor | POWER | Motor power supply |
| GND | GND | GND | Shared logic and motor ground |
| AIN1 | AIN1 | GPIO | PWM capable for speed control |
| AIN2 | AIN2 | GPIO | PWM capable for speed control |
| BIN1 | BIN1 | GPIO | PWM capable for speed control |
| BIN2 | BIN2 | GPIO | PWM capable for speed control |
| FLT | FLT | GND | Open drain fault output, connect to pullup resistor |
Interactive pinout
Highlight:
N/A
Click a pin to copy its name · tap a tag above to spotlight a bus.