← All parts
Lora And Lorawan Radio For Raspberry Pi
AdafruitRaspberry Pi
A Raspberry Pi-based LoRa and LoRaWAN radio board for sending data over long distances, using the Adafruit LoRa Radio Bonnet.
In stock
Specifications
3- Operating Voltage
- 5V (from MicroUSB power supply)
- Flash
- 8GB MicroSD
- Ram
- 1GB
Pinout
5Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 5 | GPIO | GPIO | Connected to Button A |
| 6 | GPIO | GPIO | Connected to Button B |
| 12 | GPIO | GPIO | Connected to Button C |
| 3.3V | POWER | — | Power Rail for 3.3V |
| GND | GND | — | Ground Rail |
Interactive pinout
Highlight:
Raspberry Pi
Click a pin to copy its name · tap a tag above to spotlight a bus.
Related parts
6Related boards
- 1 3 Color Tft Bonnet For Raspberry PiAdafruit · Raspberry Pi
- 128X64 Oled Bonnet For Raspberry PiAdafruit · Raspberry Pi
- 16 Channel Pwm Servo Hat For Raspberry PiAdafruit · Raspberry Pi
- 16 Channel Servo Driver With Raspberry PiAdafruit · Raspberry Pi
- 16X2 Character Lcd Plus Keypad For Raspberry PiAdafruit · Raspberry Pi
- 2 13 In E Ink BonnetAdafruit · Raspberry Pi