← All parts
Raspberry Pi Zero 2 W
Raspberry PiBroadcom BCM2710A1
The Raspberry Pi Zero 2 W is a single-board computer with a quad-core 64-bit Arm Cortex-A53 CPU and 512MB LPDDR2 SDRAM, offering improved performance over the original Raspberry Pi Zero.
In stock
Specifications
7- Operating Voltage
- 5V DC
- Logic Level
- 3.3V
- Clock Speed
- 1GHz
- Flash
- 512MB LPDDR2 SDRAM
- Gpio Count
- 40
- Dimensions
- 65mm x 30mm
- Connectivity
- USB 2.0, HDMI, CSI-2 camera connector, microSD card slot, Bluetooth 4.2, BLE
Pinout
10Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| VCC | POWER | POWER | Power supply |
| GND | GND | GND | Ground |
| TXD | UART | UART | Serial transmit |
| RXD | UART | UART | Serial receive |
| SCL | I2C | I2C | I2C clock |
| SDA | I2C | I2C | I2C data |
| MOSI | SPI | SPI | SPI master out slave in |
| MISO | SPI | SPI | SPI master in slave out |
| SCK | SPI | SPI | SPI clock |
| CS0 | SPI | SPI | SPI chip select 0 |
Interactive pinout
Highlight:
Broadcom BCM2710A1
Click a pin to copy its name · tap a tag above to spotlight a bus.