← All parts
Sharp Memory Display
AdafruitRaspberry Pi
The image shows a breadboard setup for connecting a Sharp Memory Display to a Raspberry Pi. The display is connected via GPIO pins, with specific connections as indicated in the diagram.
In stock
Specifications
2- Operating Voltage
- 3.3V (Vin) V
- Logic Level
- 3.3V V
Pinout
5| Pin | Name | Functions | Notes |
|---|---|---|---|
| GND | GND | POWERGND | Ground |
| 3.3V | Vin | POWER | Supply voltage |
| SCK (GPIO 11 | Clk | SPI | Clock signal for SPI |
| MOSI (GPIO 10 | DI | SPI | Master Out Slave In for SPI |
| GPIO 6 | CS | SPI | Chip Select signal |
Interactive pinout
Highlight:
Raspberry Pi
Click a pin to copy its name · tap a tag above to spotlight a bus.
Related parts
6Related boards
- 1.3 Color TFT Bonnet For Raspberry PiAdafruit · Raspberry Pi
- 128X64 OLED Bonnet For Raspberry PiAdafruit · Raspberry Pi
- 16 Channel PWM Servo Hat For Raspberry PiAdafruit · Raspberry Pi
- 16 Channel Servo Driver With Raspberry PiAdafruit · Raspberry Pi
- 16X2 Character LCD Plus Keypad For Raspberry PiAdafruit · Raspberry Pi
- 2.13 In E Ink BonnetAdafruit · Raspberry Pi