Adafruit boards

Adafruit · ATSAMD21E18

The Adafruit Trinket M0 is a small microcontroller board with CircuitPython support, featuring 5 GPIO pins and various digital/analog capabilities.

Adafruit · RP2040

A small, USB-compatible board with an RP2040 microcontroller and STEMMA QT connector for easy I2C connections.

Adafruit · Not specified

Adafruit TSL2561 light sensor board with labeled pins for I2C, power, and ground.

Adafruit

The Adafruit TSL2591 is a high dynamic range digital light sensor with I2C interface, suitable for measuring both full spectrum and infrared light.

Adafruit · Adafruit VEML7700 Lux Sensor

A simple ambient light sensor with I2C interface, suitable for use with 3.3V or 5V microcontrollers.

Adafruit

The Adafruit VL53L0X Time-of-Flight Micro-LIDAR Distance Sensor Breakout board is a small and easy-to-use distance sensor that communicates over I2C. It supports multiple sensors on the same bus with unique addresses.

Adafruit · Adafruit VL53L1X Time-of-Flight Sensor

A high-precision distance sensor with a range up to 4 meters, using I2C for communication.

Adafruit

The Adafruit VL6180X is a Time of Flight distance sensor with I2C interface and built-in lux sensor.

Adafruit · Raspberry Pi

This guide explains how to use a DS18B20 temperature sensor with Raspberry Pi for temperature readings.

Adafruit · ATmega32u4, ATmega328P, ATSAMD21, ATSAMD51, nRF52, Teensy, ESP32/ESP8266

Adalogger FeatherWing adds a battery-backed RTC and microSD card storage to any Feather main board.

Adafruit

The Adg728 is an analog switch matrix with 8 channels, controlled via I2C. It includes power and ground pins for operation.

Adafruit

The Adg729 Dual 1 to 4 Analog Matrix Switch board features a custom PCB with STEMMA QT connectors for easy interfacing. It includes power pins, I2C logic pins, and analog switch pins.

Adafruit

The Adafruit ADS122C04 is a high-precision ADC with I2C interface for use in scientific or engineering measurements.

Adafruit · N/A

The Adafruit ADS7830 is an 8-channel, 8-bit ADC with I2C interface for connecting analog sensors to microcontrollers.

Adafruit · Adafruit ADT7410 Breakout

An I2C temperature sensor with high precision and resolution, suitable for use with Arduino or CircuitPython.

Adafruit

A FeatherWing with ADXL343 accelerometer and ADT7410 temperature sensor, featuring I2C communication and interrupt pins.

Adafruit · Arduino

Analog Devices ADXL343 breakout board with I2C and optional SPI interfaces, suitable for 3.3V or 5V systems.

Adafruit

A digital accelerometer with I2C and SPI interfaces, featuring a 3-axis MEMS sensor for measuring acceleration in X, Y, Z axes.

Adafruit

Controls DC motors and stepper motors using Adafruit Motor Shield.

Adafruit · ATmega328P

A board for AHRS (Attitude and Heading Reference System) using the Adafruit 9-DOF or 10-DOF breakouts.

Adafruit · ESP32

A breakout board that allows a microcontroller to use the ESP32 as a WiFi or BLE co-processor via SPI and 2 control pins.

Adafruit · ESP32

A FeatherWing board featuring an ESP32 co-processor, with various digital and analog pins for GPIO, ADC, I2C, SPI, UART, and power/ground connections.

Adafruit · ESP32

A shield that provides WiFi and BLE capabilities to Arduino boards via an ESP32 co-processor.

Adafruit · Adafruit AM2315

An I2C temperature and humidity sensor with a rugged case.