← All parts
Ripple-Carry BInary Counter/Divider
4024
ic logic
A ripple-carry binary counter/divider IC that counts in binary and can be used for frequency division or as a simple counter.
In stock
Specifications
3- Operating Voltage
- 4.5V to 18V (typical) / 20V (maximum) V
- Supply Current
- 36µA (max) mA
- Temperature Range
- -40°C to +85°C °C
Pinout
16Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | CLK | GPIO | Clock input |
| 2 | Q0 | GPIO | Output for the least significant bit of the counter |
| 3 | Q1 | GPIO | Output for the second least significant bit of the counter |
| 4 | Q2 | GPIO | Output for the third least significant bit of the counter |
| 5 | Q3 | GPIO | Output for the fourth least significant bit of the counter |
| 6 | Q4 | GPIO | Output for the fifth least significant bit of the counter |
| 7 | Q5 | GPIO | Output for the sixth least significant bit of the counter |
| 8 | Q6 | GPIO | Output for the seventh least significant bit of the counter |
| 9 | Q7 | GPIO | Output for the eighth least significant bit of the counter |
| 10 | NC | GND | Not connected, used as a ground pin |
| 11 | NC | GND | Not connected, used as a ground pin |
| 12 | NC | GND | Not connected, used as a ground pin |
| 13 | NC | GND | Not connected, used as a ground pin |
| 14 | VCC | POWER | Supply voltage input |
| 15 | NC | GND | Not connected, used as a ground pin |
| 16 | NC | GND | Not connected, used as a ground pin |
Interactive pinout
Highlight:
4024
Click a pin to copy its name · tap a tag above to spotlight a bus.