Logic IC
408 Logic IC chips — pinouts, specs, and datasheets.
74AC00 Quad NAND
74AC00 · Texas Instruments
The SNx4AC00 is a quad NAND gate IC that performs the Boolean function Y = A × B or Y = A + B in positive logic, with inputs and outputs designed for digital signal processing.
74AC04 · Texas Instruments
The 74AC04 is a hex inverter IC that performs the Boolean function Y = A for six independent inverters.
74AC08 Quad AND
74AC08 · Texas Instruments
The 74AC08 is a quad AND gate IC that performs the Boolean function Y = A • B in positive logic, operating from 2V to 6V.
74AC10 · Texas Instruments
The 74AC10 is a triple 3-input NAND gate IC designed for digital logic applications such as alarm/tamper detection circuits and SR latches.
74AC11 · Texas Instruments
The SN74AC11 is a triple 3-input AND gate IC that performs the Boolean function Y = A • B • C in positive logic.
74AC125 · Texas Instruments
The SN74AC125 is a quad bus buffer with 3-state outputs, designed to drive or redrive digital signals and support up to ±75mA output current in short bursts.
74AC126 · Texas Instruments
The SN74AC126 is a quad non-inverting buffer with 3-state outputs, designed for wide voltage operation and high output drive capability.
74AC132 · Texas Instruments
74AC132 is a quad Schmitt NAND gate IC that supports up to 6V inputs and provides high drive capability, suitable for alarm or tamper detection circuits.
74AC14 · Texas Instruments
The 74AC14 is a hex Schmitt inverter that performs the Boolean function Y = A, with six independent inverters and Schmitt trigger action for clean output signals.
74AC165 · Texas Instruments
The 74AC165 is an 8-bit parallel-input shift register that can be loaded in parallel or shifted serially, with a wide operating voltage range and high output drive capability.
74AC240 · Texas Instruments
The 74AC240 is an octal buffer with inverted outputs, providing input and output enable functionality.
74AC241 · Texas Instruments
The SN74AC241 is an octal buffer with 3-state outputs, designed for memory address drivers and bus-oriented receivers/transmitters.
74AC244 · Texas Instruments
The 74AC244 is an octal buffer or driver with 3-state outputs, designed for memory address drivers and bus-oriented receivers/transmitters.
74AC245 · Texas Instruments
The SN54AC245 is an octal bus transceiver designed for asynchronous two-way communication between data buses, with features including direction control and output enable.
74AC32 Quad OR
74AC32 · Texas Instruments
The 74AC32 is a quad OR gate IC that performs the Boolean function Y = A + B or Y = A × B in positive logic.
74AC373 · Texas Instruments
The 74AC373 is an octal D-type transparent latch with 3-state outputs designed for parallel data access and bidirectional bus driving.
74AC374 · Texas Instruments
The 74AC374 is an octal D flip-flop with 3-state outputs designed for driving bus lines directly and implementing buffer registers or I/O ports.
74AC541 · Texas Instruments
The SN74AC541 is an octal buffer with 3-state outputs, used for driving or redriving digital signals and holding them during controller resets.
74AC573 · Texas Instruments
The SN74AC573 is an octal D-type transparent latch with 3-state outputs, used for buffer registers and bidirectional bus drivers.
74AC574 · Texas Instruments
The SN54AC574 is an octal D flip-flop with 3-state outputs designed for use in buffer registers, I/O ports, bidirectional bus drivers, and working registers.
74AC595 · Texas Instruments
The SN74AC595 is an 8-bit shift register with 3-state outputs, used for output expansion and LED matrix control.
74AC74 · Texas Instruments
The 74AC74 is a dual D-type flip-flop with clear and preset inputs, used for data storage and toggling applications.
74AC86 Quad XOR
74AC86 · Texas Instruments
The 74AC86 is a quad XOR gate that performs the Boolean function Y = A ⊕ B or Y = AB + AB in positive logic, with inputs and outputs for four channels.
74AHC00 · Texas Instruments
The 74AHC00 is a quad NAND gate IC that performs the Boolean function Y = A • B or Y = A + B in positive logic.
74AHC02 Quad NOR
74AHC02 · Texas Instruments
The SN74AHC02 is a quad NOR gate IC that performs the Boolean function Y = A ● B or Y = A + B in positive logic.
74AHC04 · Texas Instruments
The 74AHC04 Hex Inverter is a digital logic device that contains six independent inverters, performing the Boolean function Y = A. It operates within an input voltage range of 2V to 5.5V and has various package options including PDIP, SOIC, SSOP, LCCC, TSSOP, VQFN, and WQFN.
74AHC05 · Texas Instruments
The SN74AHC05 is a hex inverter with open-drain outputs, used for digital signal inversion and logic operations.
74AHC08 Quad AND
74AHC08 · Texas Instruments
The SN74AHC08 is a quad 2-input positive-AND gate IC, designed for digital logic applications with low drive and slow rise/fall times to reduce output ringing.
74AHC125 · Texas Instruments
The 74AHC125 is a quad bus buffer with 3-state outputs, used in applications like flow meters and programmable logic controllers.
74AHC126 · Texas Instruments
The SN74AHC126 is a quad bus buffer with 3-state outputs designed to drive and disable digital signals. It operates over an input voltage range of 0V to 5.5V and has low delay characteristics.
74AHC132 · Texas Instruments
The SN74AHC132 is a quad Schmitt NAND gate designed for digital signal processing with noise immunity and temperature-compensated thresholds.
74AHC138 · Texas Instruments
The SN74AHC138 is a 3-to-8 line decoder/demultiplexer with three enable inputs and eight outputs.
74AHC139 · Texas Instruments
The SN74AHC139 is a dual 2-to-4 decoder designed for high-speed memory decoding and data routing applications, with two enable inputs per channel to simplify cascading or demultiplexing.
74AHC14 · Texas Instruments
The 74AHC14 is a hex Schmitt inverter that performs the Boolean function Y = A, with each of its six inverters having different input threshold levels for positive and negative signals.
74AHC157 · Texas Instruments
The 74AHC157 is a quad 2-to-1 multiplexer that selects between two data sources based on the state of its address select pins and strobe input.
74AHC158 · Texas Instruments
The SN74AHC158 is a quad 2-line to 1-line data selector/multiplexer that selects between two sources based on the state of the strobe input.
74AHC164 · Texas Instruments
The SN74AHC164 is an 8-bit shift register with AND-gated serial inputs and an asynchronous clear input, designed for data storage and shifting.
74AHC165 · Texas Instruments
The SN74AHC165 is an 8-bit shift register with parallel outputs, designed for serial data input and daisy-chaining. It operates in a wide voltage range from 2V to 5.5V.
74AHC174 · Texas Instruments
The SN74AHC174 is a hex D-type flip-flop designed for buffer/storage registers and shift registers, with six flip-flops each having single-rail outputs.
74AHC238 · Texas Instruments
The SN74AHC238 is a 3-to-8 line decoder with address select inputs and strobe inputs, enabling memory device selection or data routing.
74AHC240 · Texas Instruments
The 74AHC240 is an octal buffer with inverted outputs, used for bus interfacing and data retention in various applications.
74AHC244 · Texas Instruments
The 74AHC244 is an octal buffer with 3-state outputs designed for memory-address drivers, clock drivers, and bus-oriented receivers/transmitters.
74AHC273 · Texas Instruments
A D-type flip-flop with eight channels, used for data storage and shift register applications, featuring positive-edge triggering and direct clear input.
74AHC32 Quad OR
74AHC32 · Texas Instruments
74AHC32 is a quad 2-input OR gate IC used for enabling or disabling digital signals, controlling LEDs, and translating between communication modules.
74AHC367 · Texas Instruments
The SN74AHC367 is a hex buffer with 3-state outputs, designed for digital signal enablement and LED control in a 2V to 5.5V VCC operating range.
74AHC373 · Texas Instruments
The 74AHC373 is an octal transparent D-type latch with 3-state outputs for digital signal enablement and translation between communication modules and system controllers.
74AHC374 · Texas Instruments
The SNx4AHC374 is an octal D flip-flop with 3-state outputs, designed for buffer registers and bidirectional bus drivers. It operates from 2V to 5.5V and supports down-voltage translation.
74AHC540 · Texas Instruments
The 74AHC540 is an octal buffer with inverted outputs, suitable for driving bus lines or memory address registers.
74AHC541 · Texas Instruments
The 74AHC541 is an octal buffer with 3-state outputs, ideal for driving bus lines or memory address registers.
74AHC573 · Texas Instruments
The 74AHC573 is an octal transparent D-type latch designed for 2V to 5.5V VCC operation, used in various applications including servers and electronic points of sale.
74AHC574 · Texas Instruments
The SNx4AHC574 is an octal D flip-flop with 3-state outputs, designed for driving highly capacitive or low-impedance loads and suitable for buffer registers, I/O ports, bidirectional bus drivers, and working registers.
74AHC594 · Texas Instruments
The 74AHC594 is an 8-bit shift register with storage capabilities, featuring separate clocks and clear inputs for the shift and storage registers.
74AHC595 · Texas Instruments
The SN74AHC595 is an 8-bit shift register with parallel outputs, used for serial-to-parallel data conversion and shifting.
74AHC74 · Texas Instruments
The 74AHC74 is a dual D flip-flop that stores data on positive clock edges, with preset and clear functions.
74AHC86 Quad XOR
74AHC86 · Texas Instruments
The 74AHC86 is a quad XOR gate IC that performs Boolean functions on two inputs, producing an output active low when inputs are at the same level or different levels.
74F00 Quad NAND
74F00 · Texas Instruments
The SN74F00 is a quad 2-input positive-NAND gate IC that operates over a wide temperature range and supports digital logic operations.
74F02 Quad NOR
74F02 · Texas Instruments
The SN54F02 and SN74F02 are quad 2-input positive NOR gates designed for military and general-purpose applications with a wide operating temperature range.
74F04 · Texas Instruments
A hex inverter IC that performs the Boolean function Y = A for six independent inverters.
74F08 Quad AND
74F08 · Texas Instruments
The SN74F08 is a quad 2-input positive AND gate IC designed for digital logic applications.
74F10 · Texas Instruments
A logic gate IC that implements three independent 3-input positive NAND gates.
74F109 · Texas Instruments
The 74F109 is a dual J-K positive-edge-triggered flip-flop with clear and preset functions, designed for use in digital circuits.
74F11 · Texas Instruments
The 74F11 is a triple 3-input AND gate IC that operates over a wide temperature range and supports military applications.
74F112 · Texas Instruments
The SN74F112 is a dual negative-edge-triggered J-K flip-flop with clear and preset functions, designed for digital logic applications.
74F125 · Texas Instruments
The SN74F125 is a quad bus buffer with 3-state outputs used for driving or buffering bus lines and memory address registers.
74F126 · Texas Instruments
The SN74F126 is a quad bus buffer with 3-state outputs designed for use in digital circuits.
74F138 · Texas Instruments
The SN54F138 and SN74F138 are 3-to-8 line decoders designed for high-speed memory decoding or data routing applications.
74F153 · Texas Instruments
The 74F153 is a dual 4-to-1 multiplexer used for data selection and parallel-to-serial conversion.
74F175 · Texas Instruments
The SN74F175 is a quad D flip-flop with clear inputs and outputs for buffer/storage registers and shift registers.
74F20 · Texas Instruments
The SN54F20 and SN74F20 are dual 4-input positive NAND gates designed for military and standard temperature ranges respectively.
74F21 · Texas Instruments
The 74F21 is a dual 4-input AND gate IC designed for use in digital logic circuits.
74F240 · Texas Instruments
The SN54F240 and SN74F240 are octal buffers/drivers with 3-state outputs designed for memory address drivers, clock drivers, and bus-oriented receivers/transmitters.
74F241 · Texas Instruments
The SN74F241 is an octal buffer with 3-state outputs designed for memory address drivers and bus-oriented receivers/transmitters.
74F244 · Texas Instruments
The 74F244 is an octal buffer designed for memory address drivers and bus-oriented receivers/transmitters, operating from 0°C to 70°C.
74F245 · Texas Instruments
The 74F245 is an octal bus transceiver designed for asynchronous communication between data buses, featuring 3-state outputs and support for various package types.
74F253 · Texas Instruments
The 74F253 is a dual 4-to-1 multiplexer that selects between four data inputs and outputs one of them to a single line. It operates over a temperature range from -55°C to 125°C (SN54F253) or 0°C to 70°C (SN74F253).
74F257 · Texas Instruments
The 74F257 is a quad 2-to-1 multiplexer designed for bus-organized systems with 3-state outputs.
74F258 · Texas Instruments
The 74F258 is a quad 2-to-1 multiplexer designed for bus-organized systems, with 3-state outputs that can interface directly with system buses.
74F27 · Texas Instruments
The SN74F27 is a triple 3-input positive NOR gate IC designed for use in digital logic circuits.
74F283 · Texas Instruments
The 74F283 is a 4-bit adder IC that performs binary addition and provides sum outputs and carry terms.
74F299 · Texas Instruments
The SN74F299 is an obsolete 8-bit shift register that can operate in four modes: Hold, Shift Right, Shift Left, and Load Data.
74F30 8-in NAND
74F30 · Texas Instruments
The SN54F30 is an 8-input positive NAND gate designed for military applications with a temperature range of -55°C to 125°C.
74F32 Quad OR
74F32 · Texas Instruments
The 74F32 is a quad OR gate IC that performs the Boolean function Y = A + B or Y = A • B.
74F373 · Texas Instruments
The 74F373 is an octal transparent D-type latch with 3-state outputs, used for buffer registers, I/O ports, and bidirectional bus drivers.
74F374 · Texas Instruments
The 74F374 is an octal D flip-flop designed for use in buffer registers, I/O ports, and bidirectional bus drivers.
74F573 · Texas Instruments
The 74F573 is an octal latch designed for driving highly capacitive loads and implementing buffer registers or I/O ports.
74F574 · Texas Instruments
The SN74F574 is an octal D flip-flop with 3-state outputs designed for use in buffer registers and I/O ports.
74F74 · Texas Instruments
The 74F74 is a dual positive-edge-triggered D-type flip-flop with clear and preset inputs, used for data storage and synchronization in digital circuits.
74F86 Quad XOR
74F86 · Texas Instruments
The 74F86 is a quad 2-input exclusive-OR gate IC that performs logical operations on digital signals.
74HC03 · Texas Instruments
The SN74HC03 is a quad 2-input NAND gate with open-drain outputs, used for digital logic operations and interfacing with CMOS inputs.
74HC05 · Texas Instruments
The 74HC05 Hex Inverter (OC) is a digital logic IC that inverts six independent digital signals with open-drain outputs, suitable for various applications including up-translation and down-translation.
74HC107 · Nexperia
The 74HC107 is a dual negative-edge triggered JK flip-flop with reset, featuring J and K inputs, clock (CP) and reset (R) inputs, and complementary Q and Q' outputs.
74HC123 · Nexperia
The 74HC123 is a dual retriggerable monostable multivibrator with reset, used for generating output pulses of programmable width based on external timing components.
74HC154 · Nexperia
The 74HC154 is a 4-to-16 line decoder/demultiplexer that decodes four binary address inputs into sixteen outputs, with two enable inputs to control output states.
74HC166 · Texas Instruments
The 74HC166 is an 8-bit shift register that can be used to increase the number of inputs/outputs to a microcontroller, featuring parallel and serial data input modes.
74HC173 · Nexperia
The 74HC173 is a quad D-type flip-flop with positive-edge triggering and 3-state functionality, used for data storage and processing in digital circuits.
74HC191 · Texas Instruments
The 74HC191 is a 4-bit synchronous reversible counter that can count up or down based on control inputs and has low power consumption.
74HC238 · Nexperia
The 74HC238 is a 3-to-8 line decoder/demultiplexer that decodes three binary weighted address inputs to eight mutually exclusive outputs, with enable inputs for easy expansion.
74HC257 · Texas Instruments
The 74HC257 is a quad 2-to-1 multiplexer that selects between two data inputs based on the state of its select lines and outputs the selected data.
74HC258 · Texas Instruments
The 74HC258 is a quad 2-to-1 multiplexer with 3-state outputs, used in bus systems to select between two data sources.
74HC266 · Texas Instruments
The SN74HC266 is a quad XNOR gate with open-drain outputs, performing Y = A ⊕ B in positive logic.
74HC30 8-in NAND
74HC30 · Nexperia
The 74HC30 is an 8-input NAND gate IC used for digital logic operations with a wide supply voltage range from 2.0V to 6.0V.
74HC366 · Nexperia
The 74HC366 is a hex inverting buffer/line driver with 3-state outputs, designed for CMOS logic levels and featuring input clamp diodes.
74HC368 · Texas Instruments
The 74HC368 is a hex inverting buffer with 3-state outputs, designed for memory address drivers and bus-oriented receivers/transmitters.
74HC390 · Nexperia
The 74HC390 is a dual decade ripple counter that can operate in BCD or bi-quinary configurations, featuring asynchronous master reset and separate clock inputs for each section.
74HC573 · Nexperia
The 74HC573 is an octal D-type transparent latch with 3-state outputs, used for latching and storing data in digital circuits.
74HC597 · Nexperia
The 74HC597 is an 8-bit shift register with input flip-flops, used for serial-to-parallel data conversion and storage.
74HC85 · Nexperia
The 74HC85 is a 4-bit magnitude comparator that compares two binary, BCD or monotonic codes and outputs the result of comparison.
74HCT00 · Texas Instruments
The 74HCT00 is a quad NAND gate IC designed to perform Boolean function Y = A • B in positive logic, with low power consumption and TTL-compatible inputs.
74HCT02 Quad NOR
74HCT02 · Texas Instruments
The 74HCT02 is a quad NOR gate IC that performs the Boolean function Y = A • B or Y = A + B in positive logic, with each of its four independent gates operating within an input voltage range of 4.5V to 5.5V.
74HCT03 · Nexperia
The 74HCT03 is a quad 2-input NAND gate IC with open-drain outputs, designed for use in digital logic circuits.
74HCT04 · Texas Instruments
The 74HCT04 Hex Inverter is a digital logic IC that performs the Boolean function Y = A in positive logic. It contains six independent inverters.
74HCT08 Quad AND
74HCT08 · Texas Instruments
The SN74HCT08 is a quad 2-input positive AND gate IC, performing the Boolean function Y = A • B in positive logic.
74HCT10 · Nexperia
The 74HCT10 is a triple 3-input NAND gate IC used for digital logic operations, with inputs and outputs designed for TTL level signals.
74HCT107 · Nexperia
The 74HCT107 is a dual negative-edge triggered JK flip-flop with reset, featuring individual J and K inputs, clock (CP) and reset (R) inputs, and complementary Q and Q' outputs.
74HCT109 · Nexperia
The 74HCT109 is a dual JK flip-flop with set and reset, featuring positive-edge triggering.
74HCT11 · Nexperia
The 74HCT11 is a triple 3-input AND gate designed for CMOS logic levels, with wide supply voltage range and high noise immunity.
74HCT112 · Nexperia
The 74HCT112 is a dual negative-edge triggered JK flip-flop designed for use in digital circuits, featuring asynchronous set and reset inputs.
74HCT123 · Nexperia
The 74HCT123 is a dual retriggerable monostable multivibrator with reset, used for generating output pulses of programmable width based on external components.
74HCT125 · Texas Instruments
The 74HCT125 is a quad bus buffer with 3-state outputs, designed to drive up to 15 LSTTL loads and operate within an input voltage range of 0V to VCC.
74HCT126 · Nexperia
The 74HCT126 is a quad buffer/line driver with 3-state outputs that can be enabled or disabled by an output enable input. It operates over a wide supply voltage range and has low power dissipation, high noise immunity, and ESD protection.
74HCT132 · Nexperia
The 74HCT132 is a quad 2-input NAND Schmitt trigger IC, used for wave and pulse shaping in digital circuits.
74HCT138 · Texas Instruments
The 74HCT138 is a 3-to-8 line decoder designed for high-speed memory decoding and data routing applications.
74HCT139 · Texas Instruments
The 74HCT139 is a dual 2-to-4 decoder/demultiplexer designed for high-speed memory decoding or data routing applications.
74HCT14 · Texas Instruments
The 74HCT14 is a hex Schmitt trigger inverter that converts input signals into clean, stable output signals with high noise immunity and fast switching times.
74HCT151 · Nexperia
The 74HCT151 is an 8-to-1 multiplexer with three select inputs and one enable input, routing one of eight binary inputs to complementary outputs.
74HCT153 · Nexperia
The 74HCT153 is a dual 4-to-1 multiplexer that selects one of four binary inputs based on select lines, with enable inputs to force outputs low.
74HCT154 · Nexperia
The 74HC154/74HCT154 is a 4-to-16 line decoder/demultiplexer that decodes four binary inputs into sixteen outputs, with two enable inputs to control output states.
74HCT157 · Texas Instruments
The 74HCT157 is a quad 2-to-1 multiplexer with high-current outputs and low power consumption.
74HCT163 · Nexperia
A presettable synchronous 4-bit binary counter that can be used to design counters of any modulus with minimal external logic.
74HCT164 · Nexperia
The 74HCT164 is an 8-bit serial-in/parallel-out shift register with features like wide supply voltage range and multiple package options.
74HCT165 · Texas Instruments
The SN74HCT165 is an 8-bit shift register that can operate in parallel or serial mode, with inputs and outputs compatible with LSTTL logic.
74HCT166 · Nexperia
The 74HCT166 is an 8-bit serial or parallel-in/serial-out shift register that supports parallel loading and serial shifting of data.
74HCT173 · Nexperia
The 74HCT173 is a quad D-type flip-flop with positive-edge triggering and 3-state functionality, used for data storage and processing.
74HCT174 · Nexperia
The 74HCT174 is a hex D-type flip-flop with positive-edge triggering and individual data inputs/outputs, featuring an asynchronous master reset input.
74HCT175 · Nexperia
A quad D-type flip-flop with positive-edge triggering, used for storing and resetting data inputs.
74HCT193 · Nexperia
The 74HCT193 is a presettable synchronous 4-bit binary up/down counter that can count in both directions and has parallel load and master reset capabilities.
74HCT238 · Nexperia
The 74HCT238 is a 3-to-8 line decoder/demultiplexer that decodes three binary weighted address inputs to eight mutually exclusive outputs, with enable inputs for easy expansion.
74HCT240 · Texas Instruments
The 74HCT240 is an octal buffer with inverted data passing and 3-state outputs, designed for memory address drivers and bus-oriented applications. It operates from a supply voltage range of 4.5V to 5.5V.
74HCT241 · Nexperia
The 74HCT241 is an octal buffer/line driver with 3-state outputs, used for interfacing between CMOS or TTL logic levels and can be configured as two 4-bit buffers or one 8-bit buffer.
74HCT244 · Texas Instruments
The 74HCT244 is an octal buffer with 3-state outputs, designed to improve performance and density in memory address drivers and bus-oriented receivers/transmitters.
74HCT245 · Texas Instruments
74HCT245 Octal Bus Transceiver is designed for asynchronous two-way communication between data buses, featuring high-current 3-state outputs and low power consumption.
74HCT251 · Nexperia
The 74HCT251 is an 8-to-1 multiplexer with three select inputs and one output enable input, allowing selection of one of eight data inputs to be routed to the output.
74HCT253 · Nexperia
The 74HCT253 is a dual 4-to-1 multiplexer with 3-state outputs, used for data selection and routing in digital circuits.
74HCT257 · Texas Instruments
The 74HCT257 is a quad 2-to-1 multiplexer with high-current 3-state outputs designed for bus interface in high-performance systems.
74HCT259 · Nexperia
The 74HCT259 is an 8-bit addressable latch that can operate in various modes including memory, demultiplexer, and reset mode.
74HCT27 · Nexperia
The 74HCT27 is a triple 3-input NOR gate designed for use in digital circuits, providing high noise immunity and wide supply voltage range.
74HCT273 · Texas Instruments
74HCT273 is an octal D flip-flop with positive-edge triggering and a common clear enable input.
74HCT30 · Nexperia
The 74HCT30 is an 8-input NAND gate IC used for digital logic operations with a wide supply voltage range from 2.0V to 6.0V.
74HCT32 Quad OR
74HCT32 · Texas Instruments
The 74HCT32 is a quad OR gate IC that performs the Boolean function Y = A + B in positive logic, with low power consumption and TTL-compatible inputs.
74HCT365 · Nexperia
The 74HCT365 is a hex buffer/line driver with 3-state outputs, designed for CMOS and TTL level inputs.
74HCT366 · Nexperia
The 74HCT366 is a hex inverting buffer/line driver with 3-state outputs, designed for CMOS and TTL level inputs.
74HCT367 · Nexperia
The 74HCT367 is a hex buffer/line driver with 3-state outputs that can be controlled by output enable inputs (nOE). It operates over a wide supply voltage range and has ESD protection.
74HCT368 · Nexperia
The 74HCT368 is a hex inverting buffer/line driver with 3-state outputs, designed for CMOS or TTL input levels and operating from 2.0V to 6.0V supply voltage.
74HCT373 · Texas Instruments
The 74HCT373 is an octal transparent D-type latch with 3-state outputs, designed for driving highly capacitive or low-impedance loads and used in buffer registers, I/O ports, bidirectional bus drivers, and working registers.
74HCT374 · Texas Instruments
The 74HCT374 is an octal D flip-flop designed for use in digital circuits, providing edge-triggered data storage and bidirectional bus driving capabilities.
74HCT377 · Texas Instruments
The SN54HCT377 is an octal D-type flip-flop with a clock enable input, used for buffer/storage registers, shift registers, and pattern generators.
74HCT390 · Nexperia
The 74HCT390 is a dual decade ripple counter that can operate in BCD or bi-quinary configurations, featuring asynchronous master reset and separate clock inputs for each section.
74HCT393 · Nexperia
The 74HCT393 is a dual 4-bit binary ripple counter with clock inputs, reset inputs, and buffered parallel outputs.
74HCT540 · Texas Instruments
The SN74HCT540 is an octal buffer with 3-state outputs that can drive up to 15 LSTTL loads and has low power consumption.
74HCT541 · Texas Instruments
The 74HCT541 is an octal buffer with 3-state outputs, designed for interfacing with system buses or driving up to 15 LSTTL loads.
74HCT573 · Texas Instruments
The 74HCT573 is an octal transparent D-type latch with 3-state outputs, used for buffer registers and I/O ports.
74HCT574 · Texas Instruments
The 74HCT574 is an octal D flip-flop with 3-state outputs, designed for bus driving and suitable for buffer registers, I/O ports, bidirectional bus drivers, and working registers.
74HCT595 · Texas Instruments
The SN74HCT595 is an 8-bit shift register with 3-state outputs designed for output expansion and LED matrix control.
74HCT597 · Nexperia
The 74HCT597 is an 8-bit shift register with input flip-flops, used for serial-to-parallel data conversion and storage.
74HCT74 · Texas Instruments
The 74HCT74 is a dual D-type positive-edge-triggered flip-flop with preset and clear functions, used for data storage and transfer.
74HCT85 · Nexperia
The 74HCT85 is a 4-bit magnitude comparator that compares two binary or BCD inputs and outputs the result of comparison (A>B, A=B, A<B).
74HCT86 Quad XOR
74HCT86 · Nexperia
The 74HCT86 is a quad 2-input EXCLUSIVE-OR gate designed for digital logic operations with wide supply voltage compatibility.
74LS00 Quad NAND
74LS00 · Texas Instruments
The 74LS00 is a quad NAND gate IC that performs the Boolean function Y = A .B or Y = A + B in positive logic.
74LS02 Quad NOR
74LS02 · Texas Instruments
The 74LS02 is a quad NOR gate IC, performing logical operations on digital signals.
74LS03 · Texas Instruments
The 74LS03 is a quad NAND gate with open-collector outputs.
74LS04 · Texas Instruments
The 74LS04 Hex Inverter is a digital logic IC that contains six independent inverters.
74LS05 · Texas Instruments
The 74LS05 Hex Inverter (OC) is a digital logic IC with six independent inverters, designed for use in various applications requiring level conversion and signal inversion.
74LS08 Quad AND
74LS08 · Texas Instruments
The 74LS08 is a quad 2-input positive-AND gate IC, providing four AND gates in a single package.
74LS10 · Texas Instruments
The 74LS10 is a logic IC that implements three-input positive NAND gates.
74LS11 · Texas Instruments
The 74LS11 is a triple 3-input positive-AND gate IC used for digital logic operations.
74LS122 · Texas Instruments
The 74LS122 is a retriggerable monostable multivibrator used for generating timed pulses based on input signals.
74LS123 · Texas Instruments
The 74LS123 is a dual retriggerable monostable multivibrator designed for generating timed pulses.
74LS132 · Texas Instruments
The 74LS132 is a quad Schmitt NAND gate IC, used for digital logic operations and signal conditioning.
74LS138 · Texas Instruments
The 74LS138 is a 3-to-8 line decoder/demultiplexer with active-high outputs.
74LS14 · Texas Instruments
The 74LS14 Hex Schmitt Inverter is a logic inverter with six channels, each providing Schmitt trigger action for clean output signals.
74LS145 · Texas Instruments
The 74LS145 BCD-to-Decimal Driver converts binary-coded decimal (BCD) to a seven-segment display format for numeric readout.
74LS148 · Texas Instruments
The 74LS148 is an 8-to-3 encoder that converts eight data lines to three binary outputs.
74LS151 · Texas Instruments
The 74LS151 is an 8-to-1 multiplexer with 16 pins in various packages.
74LS153 · Texas Instruments
The 74LS153 is a dual 4-to-1 multiplexer with 16 pins.
74LS156 · Texas Instruments
The 74LS156 is a dual 2-to-4 decoder/demultiplexer used for decoding binary input to select one of four outputs.
74LS157 · Texas Instruments
The 74LS157 is a quad 2-to-1 multiplexer with digital inputs and outputs for data selection.
74LS158 · Texas Instruments
The 74LS158 is a quad 2-to-1 multiplexer with 16 pins in various packages.
74LS164 · Texas Instruments
The 74LS164 is an 8-bit shift register with serial input, parallel output functionality.
74LS174 · Texas Instruments
The 74LS174 is a hex D flip-flop designed for digital logic applications.
74LS175 · Texas Instruments
The 74LS175 is a quad D flip-flop designed for digital signal storage and processing.
74LS191 · Texas Instruments
The 74LS191 is a synchronous binary up/down counter with down/up mode control.
74LS193 · Texas Instruments
A synchronous 4-bit up/down counter with dual clock inputs and clear functions.
74LS20 · Texas Instruments
The 74LS20 is a dual 4-input NAND gate IC, providing logic functions for digital circuits.
74LS21 · Texas Instruments
The 74LS21 is a dual 4-input positive-AND gate IC used for digital logic operations.
74LS221 · Texas Instruments
The 74LS221 is a dual monostable multivibrator IC that generates output pulses based on input triggering and timing components.
74LS240 · Texas Instruments
The 74LS240 Octal Buffer (inv) is a logic buffer that inverts its input signal and can be used to drive bus lines or memory address registers.
74LS241 · Texas Instruments
The 74LS241 Octal Buffer is a logic buffer that can drive eight channels with enable control. It supports low-voltage inputs and has high fan-out capability.
74LS243 · Texas Instruments
The 74LS243 is a quad transceiver designed for asynchronous two-way communication between data buses.
74LS244 · Texas Instruments
The 74LS244 Octal Buffer is a logic buffer that can drive eight channels with 3-state outputs, suitable for memory address drivers and bus-oriented receivers/transmitters.
74LS245 · Texas Instruments
The 74LS245 is an octal bus transceiver with 3-state outputs, designed for asynchronous two-way communication between data buses. It supports direction control and output enable functions.
74LS247 · Texas Instruments
The SN74LS247 is a BCD-to-7-segment driver for displaying binary-coded decimal values on a 7-segment display.
74LS251 · Texas Instruments
The 74LS251 is an 8-to-1 multiplexer with digital inputs and outputs.
74LS253 · Texas Instruments
The 74LS253 is a dual 4-to-1 multiplexer with 16 pins in various packages.
74LS266 · Texas Instruments
The 74LS266 is a quad 2-input exclusive-NOR gate with open-collector outputs.
74LS27 · Texas Instruments
The 74LS27 is a Triple 3-input NOR gate IC designed for digital logic applications.
74LS273 · Texas Instruments
The 74LS273 is an octal D flip-flop with clear input, used for buffer/storage registers and shift registers.
74LS283 · Texas Instruments
The 74LS283 is a 4-bit adder that performs binary addition and subtraction operations.
74LS298 · Texas Instruments
The SN74LS298 is a quad 2-in multiplexer with storage functionality.
74LS299 · Texas Instruments
The SN74LS299 is an 8-bit universal shift/storage register.
74LS30 8-in NAND
74LS30 · Texas Instruments
The 74LS30 is an 8-input NAND gate IC designed for digital logic applications.
74LS32 Quad OR
74LS32 · Texas Instruments
The 74LS32 is a quad OR gate IC designed for digital logic applications, operating within -55°C to 125°C temperature range.
74LS348 · Texas Instruments
The 74LS348 is an 8-to-3 priority encoder with 3-state outputs.
74LS373 · Texas Instruments
The 74LS373 is an octal D-type transparent latch that can be used in parallel access memory or bidirectional bus applications, featuring 3-state outputs and buffered control inputs.
74LS374 · Texas Instruments
The 74LS374 is an octal D flip-flop designed for use in bus-organized systems, featuring transparent latches and edge-triggered flip-flops with 3-state outputs.
74LS377 · Texas Instruments
The SN54LS377 Octal D Flip-Flop is a digital logic device used for storing binary data and can be enabled or disabled.
74LS378 · Texas Instruments
The 74LS378 Hex D Flip-Flop is a digital logic device used for storing binary data and performing shift operations.
74LS390 · Texas Instruments
The 74LS390 Dual Decade Counter is a digital logic IC used for counting and generating binary or decade outputs.
74LS393 · Texas Instruments
The 74LS393 is a dual binary counter that can operate as a decade or binary counter.
74LS42 · Texas Instruments
The 74LS42 is a BCD-to-decimal decoder that converts 4-bit binary-coded decimal (BCD) inputs into 10-line decimal outputs.
74LS47 · Texas Instruments
A BCD-to-7-segment decoder/driver that converts binary-coded decimal inputs into seven-segment display outputs.
74LS51 · Texas Instruments
The 74LS51 AND-OR-Invert Gate is a digital logic IC that performs logical operations on input signals.
74LS540 · Texas Instruments
The 74LS540 is an octal buffer with inverted outputs, used for signal buffering and level shifting.
74LS541 · Texas Instruments
The 74LS541 is an octal buffer that amplifies and buffers digital signals.
74LS590 · Texas Instruments
The 74LS590 is an 8-bit counter with 3-state outputs, used for counting and shifting data.
74LS593 · Texas Instruments
The 74LS593 is an 8-bit shift register with a serial-in parallel-out (SIPO) configuration.
74LS594 · Texas Instruments
The 74LS594 is an 8-bit shift register with output latches.
74LS595 · Texas Instruments
The 74LS595 is an 8-bit shift register with serial input and parallel output.
74LS597 · Texas Instruments
The 74LS597 is an 8-bit shift register designed for serial-to-parallel data conversion.
74LS623 · Texas Instruments
The 74LS623 is an octal bidirectional bus transceiver.
74LS640 · Texas Instruments
The SN54LS640 is a bidirectional bus transceiver with 3-state outputs, used for data transfer on digital buses.
74LS645 · Texas Instruments
The 74LS645 is a bidirectional bus transceiver with 3-state outputs, used for data transfer on a bus.
74LS670 · Texas Instruments
The SN74LS670 is a 4x4 register file with 3-state outputs for digital data storage and transfer.
74LS688 · Texas Instruments
The 74LS688 is an 8-bit comparator designed for general-purpose digital comparison tasks.
74LS75 · Texas Instruments
A quad latch IC that stores data in bistable latches.
74LS85 · Texas Instruments
The 74LS85 is a 4-bit magnitude comparator IC used for comparing two 4-bit binary numbers and determining which one is greater.
74LS90 · Texas Instruments
The 74LS90 Decade Counter is a binary counter that divides by twelve or counts in decades.
74LS92 · Texas Instruments
The 74LS92 is a divide-by-12 counter used for counting and dividing frequencies.
74LS93 · Texas Instruments
The 74LS93 is a 4-bit binary counter used for counting pulses or dividing frequencies.
74LV00 Quad NAND
74LV00 · Texas Instruments
The SN54LV00A is a quad 2-input positive-NAND gate IC designed for 2-V to 5.5-V VCC operation, providing low drive and slow edge rates to minimize output ringing.
74LV02 Quad NOR
74LV02 · Texas Instruments
The SN54LV02A is a quad 2-input positive-NOR gate designed for 2V to 5.5V operation, providing logic outputs based on input states.
74LV04 · Texas Instruments
A hex inverter IC that performs Boolean function Y = A, operating from 2V to 5.5V VCC with six independent inverters.
74LV05 · Texas Instruments
The SN74LV05A is a hex inverter with open-drain outputs, designed for 2V to 5.5V VCC operation and can translate voltages up to 5.5V or down to any voltage between GND and 5.5V.
74LV08 Quad AND
74LV08 · Texas Instruments
The SN74LV08A is a quad 2-input positive-AND gate designed for 2V to 5.5V operation, used in various applications including servers and telecom infrastructure.
74LV10 · Texas Instruments
The SN74LV10 is a triple 3-input positive-NAND gate IC designed for 2V to 5.5V VCC operation, used in digital logic circuits.
74LV11 · Texas Instruments
The 74LV11 is a Texas Instruments IC that implements three 3-input AND gates in positive logic, operating from 2V to 5.5V supply voltage.
74LV123 · Texas Instruments
The SN74LV123A is a dual retriggerable monostable multivibrator designed for 2-V to 5.5-V VCC operation, used in applications like AV receivers and digital video cameras.
74LV125 · Texas Instruments
The SN74LV125 is a quad bus buffer with 3-state outputs, designed for 2- to 5.5-V operation, used in various interface applications.
74LV126 · Texas Instruments
The SN74LV126 is a quad bus buffer with 3-state outputs, designed for 2V to 5.5V VCC operation and used in various applications like servers and network switches.
74LV132 · Texas Instruments
The 74LV132 is a quad Schmitt NAND gate designed for digital logic applications, providing clean outputs from slow or noisy inputs.
74LV138 · Texas Instruments
The SN74LV138 is a 3-to-8 line decoder/demultiplexer designed for high-performance memory-decoding or data-routing applications.
74LV139 · Texas Instruments
The SN74LV139A is a dual 2-to-4 decoder designed for high-speed memory decoding or data routing applications, operating from 2V to 5.5V.
74LV14 · Texas Instruments
The SN74LV14 is a hex Schmitt trigger inverter designed for 2V to 5.5V operation, used for signal conditioning and noise filtering.
74LV157 · Texas Instruments
The SN74LV157 is a quad 2-to-1 multiplexer designed for 2 V to 5.5 V operation, used in various applications like servers and LED displays.
74LV161 · Texas Instruments
The 74LV161 is a synchronous binary counter that operates from 2V to 5.5V and supports mixed-mode voltage operation on all ports.
74LV163 · Texas Instruments
The SN74LV163A is a 4-bit synchronous binary counter designed for 2V to 5.5V VCC operation, featuring internal carry look-ahead for fast counting.
74LV164 · Texas Instruments
The SN74LV164 is an 8-bit parallel-out serial shift register designed for 2V to 5.5V VCC operation, used in various bus interface applications.
74LV165 · Texas Instruments
The SN74LV165A is an 8-bit shift register designed for parallel-load operations with a supply voltage range of 2V to 5.5V.
74LV166 · Texas Instruments
The SN74LV166 is an 8-bit parallel-load shift register designed for 2V to 5.5V VCC operation, used for input expansion and data storage.
74LV174 · Texas Instruments
The SN74LV174 is a hex D-type flip-flop designed for 2V to 5.5V VCC operation, used for output expansion and LED matrix control.
74LV175 · Texas Instruments
The 74LV175 is a quad D-type flip-flop designed for 2V to 5.5V VCC operation, used as buffer or storage registers and shift registers.
74LV20 · Texas Instruments
The SN74LV20 is a dual 4-input positive-NAND gate designed for operation between 2V and 5.5V, providing high-speed switching characteristics and low power consumption.
74LV21 · Texas Instruments
The SN74LV21 is a dual 4-input AND gate designed for 2-5.5V operation, with low power consumption and partial-power-down capabilities.
74LV221 · Texas Instruments
The 74LV221 is a dual monostable multivibrator with Schmitt-trigger inputs, designed for 2V to 5.5V VCC operation and can be used in mixed-mode voltage environments.
74LV240 · Texas Instruments
The SN74LV240 is an octal inverting buffer designed for 2V to 5.5V operation, used for memory address drivers and bus-oriented receivers/transmitters.
74LV244 · Texas Instruments
The SN74LV244 is an octal buffer with four groups, each having its own enable pin, suitable for driving digital signals over longer board lengths.
74LV245 · Texas Instruments
The SN74LV245 is an octal bus transceiver designed for 2-V to 5.5-V VCC operation, used in applications such as servers and LED displays.
74LV27 · Texas Instruments
The SN74LV27 is a triple 3-input positive-NOR gate designed for 2V to 5.5V VCC operation, performing Y = A + B + C in positive logic.
74LV273 · Texas Instruments
The SN74LV273 is an octal D-type flip-flop designed for digital signal processing and data storage applications, operating from 2V to 5.5V.
74LV32 Quad OR
74LV32 · Texas Instruments
The SN74LV32 is a quad 2-input positive-OR gate designed for 2V to 5.5V VCC operation, providing low drive and slower rise/fall times to reduce output ringing.
74LV367 · Texas Instruments
The SN74LV367A is a hex buffer with line drivers designed for 2V to 5.5V VCC operation, used in applications like output expansion and LED matrix control.
74LV373 · Texas Instruments
The SN74LV373A is an octal transparent D-type latch designed for 2V to 5.5V VCC operation, used in applications like printers and network switches.
74LV374 · Texas Instruments
The 74LV374 is an octal D flip-flop with 3-state outputs, designed for logic level conversion and bi-directional bus driving.
74LV393 · Texas Instruments
The SN74LV393A is a dual 4-bit binary counter with individual clocks and clear inputs, operating from 2V to 5.5V.
74LV540 · Texas Instruments
The SN74LV540 Octal Buffer (inv) is a CMOS device designed for buffer and driver applications, supporting mixed-mode voltage operation with inputs and outputs on opposite sides of the package.
74LV541 · Texas Instruments
The SN74LV541A is an octal buffer/driver for 2-V to 5.5-V VCC operation, used for driving bus lines or memory address registers.
74LV573 · Texas Instruments
The SN74LV573 is a transparent D-type latch with 3-state outputs designed for buffer registers and bidirectional bus drivers.
74LV574 · Texas Instruments
The SN74LV574A is an octal D flip-flop with 3-state outputs designed for low-power applications in a range of voltage operations from 2V to 5.5V.
74LV594 · Texas Instruments
The 74LV594 is an 8-bit shift register with storage capabilities, operating from 2V to 5.5V and used in applications like ECGs and servers.
74LV595 · Texas Instruments
The SN74LV595 is an 8-bit shift register with parallel output, used for serial-to-parallel data conversion and LED matrix control.
74LV74 · Texas Instruments
The SN54LV74A is a dual positive-edge-triggered D-type flip-flop designed for 2-V to 5.5-V VCC operation, used in applications like PLCs and server motherboards.
74LV86 Quad XOR
74LV86 · Texas Instruments
The SN54LV86A is a quad 2-input exclusive-OR gate designed for 2V to 5.5V VCC operation, used in applications like true/complement elements.
74LVC00 · Texas Instruments
The 74LVC00 is a quad NAND gate IC that operates from 1.65V to 3.6V and has inputs capable of driving voltages up to 5.5V.
74LVC02 Quad NOR
74LVC02 · Texas Instruments
The SNx4LVC02A is a quad 2-input positive NOR gate IC designed for mixed 3.3V/5V system environments, operating from 1.65V to 3.6V with inputs accepting voltages up to 5.5V.
74LVC04 · Texas Instruments
The 74LVC04 Hex Inverter is a digital logic device that inverts six independent inputs, operating from 1.65V to 3.6V and featuring low power consumption and high ESD protection.
74LVC08 Quad AND
74LVC08 · Texas Instruments
The SN74LVC08A is a quad 2-input positive-AND gate IC designed for logic operations, operating from 1.65V to 3.6V with fast propagation delays.
74LVC10 · Texas Instruments
The SN74LVC10 is a Texas Instruments IC that performs the Boolean function Y = A • B • C or Y = A + B + C in positive logic, with inputs and outputs designed for mixed 3.3V/5V system environments.
74LVC11 · Texas Instruments
The SN74LVC11A is a triple 3-input AND gate IC that operates from 1.1V to 3.6V, with inputs tolerant up to 5.5V.
74LVC112 · Texas Instruments
A dual negative-edge-triggered J-K flip-flop designed for 1.65V to 3.6V operation, used for data retention and latching in bus interface applications.
74LVC125 · Texas Instruments
The SN74LVC125 is a quad bus buffer with 3-state outputs, designed for use in various telecommunications and networking applications.
74LVC126 · Texas Instruments
The SN74LVC126 is a quad bus buffer with 3-state outputs, designed for 1.65V to 3.6V operation and used in mixed voltage systems.
74LVC132 · Texas Instruments
The 74LVC132 is a quad Schmitt NAND gate IC with Schmitt-trigger inputs for noise immunity and support for slow input transitions.
74LVC139 · Texas Instruments
The SN74LVC139 is a dual 2-to-4 line decoder/demultiplexer operating from 1.65V to 3.6V, with inputs and outputs that can handle up to 5.5V.
74LVC14 · Texas Instruments
The 74LVC14 is a hex Schmitt inverter designed for digital signal processing, operating from 1.65V to 3.6V.
74LVC157 · Texas Instruments
The 74LVC157 is a quad 2-to-1 multiplexer that selects between two data sources based on address inputs, operating from 1.65V to 3.6V.
74LVC158 · Texas Instruments
The SN74LVC158 is a quad 2-to-1 multiplexer that selects between two data sources based on the select inputs and outputs the chosen data.
74LVC165 · Texas Instruments
The SN74LVC165 is an 8-bit parallel-load shift register that supports data shifting and loading via serial or parallel interfaces, with high push-pull output drive strength.
74LVC166 · Texas Instruments
The SN74LVC166 is an 8-bit parallel-load shift register with high push-pull output drive strength and supports partial-power-down.
74LVC240 · Texas Instruments
The SN74LVC240 is an octal buffer/driver with 3-state outputs, designed for mixed-mode signal operation from 1.65V to 3.6V.
74LVC241 · Texas Instruments
The SN74LVC241 is an octal buffer with 3-state outputs designed for use in digital circuits to drive or hold signals during controller resets and other applications.
74LVC244 · Texas Instruments
The SN74LVC244A is an octal buffer or driver with 3-state outputs, designed for asynchronous communication between data buses and operating from 1.65V to 3.6V.
74LVC245 · Texas Instruments
74LVC245 is an octal bus transceiver designed for asynchronous communication, capable of translating data from A to B or vice versa based on DIR input and can be used in mixed 3.3V/5V systems.
74LVC257 · Texas Instruments
The 74LVC257 is a quad 2-to-1 multiplexer designed for 1.65V to 3.6V operation, used in data selection and bus organization systems.
74LVC258 · Texas Instruments
The SN74LVC258 is a quad 2-to-1 multiplexer with inverted outputs, used for data selection and multiplexing applications.
74LVC32 Quad OR
74LVC32 · Texas Instruments
The 74LVC32 is a quad 2-input positive-OR gate IC that operates from 1.65V to 3.6V, with inputs tolerant up to 5.5V.
74LVC373 · Texas Instruments
The 74LVC373 is an octal transparent D-type latch that operates from 1.65V to 3.6V, with enable and output-enable pins to control data latching and bus driving.
74LVC374 · Texas Instruments
A 8-bit octal D flip-flop that operates from 1.65V to 3.6V, with enable control and clock input.
74LVC540 · Texas Instruments
The SN54LVC540A is an octal buffer/driver with 3-state outputs, designed to operate from 1.65V to 3.6V and support mixed-mode signal operation.
74LVC541 · Texas Instruments
The SN74LVC541A octal buffer/driver is designed for mixed-mode signal operation and supports 3-state outputs, operating from 1.65V to 3.6V VCC.
74LVC573 · Texas Instruments
The SN74LVC573A and SN54LVC573A are octal transparent D-type latches designed for data retention and latching, with 3-state outputs suitable for driving bus lines. They operate from 1.65V to 3.6V VCC.
74LVC574 · Texas Instruments
The SN54LVC574A and SN74LVC574A are octal D-type flip-flops with 3-state outputs designed for digital signal processing, suitable for buffer registers and I/O ports.
74LVC595 · Texas Instruments
The SN74LVC595 is an 8-bit shift register with 3-state outputs, used in network switches and LED displays.
74LVC74 · Texas Instruments
The 74LVC74 Dual D Flip-Flop is a digital logic IC designed for data storage with two independent positive-edge triggered flip-flops, operating in the voltage range of 1.65V to 3.6V.
74LVC86 Quad XOR
74LVC86 · Texas Instruments
The SN54LVC86A is a quad 2-input exclusive-OR gate designed to operate from 1.65V to 3.6V, with inputs and outputs that can tolerate voltages up to 5.5V.
CD4001 Quad NOR
CD4001B · Texas Instruments
The CD4001 is a quad NOR gate IC that provides basic digital logic functions.
CD4002B · Texas Instruments
The CD4002 is a dual 4-input NOR gate IC designed for digital logic applications.
CD4011 Quad NAND
CD4011B · Texas Instruments
The CD4011B is a CMOS logic IC containing four independent 2-input NAND gates. It offers a wide operating voltage range and is used for general-purpose digital logic in the CD4000B series.
CD4012B · Texas Instruments
The CD4012 is a dual 4-input NAND gate IC, providing logic functions for digital circuits.
CD4013B · Texas Instruments
The CD4013B is a CMOS IC with two independent positive-edge-triggered D-type flip-flops, each with set, reset, clock, and data inputs plus Q and inverted-Q outputs. It is used for shift registers, counters, and toggle applications.
CD4015B · Texas Instruments
The CD4015 is a dual shift register with 16 data inputs and outputs.
CD4016B · Texas Instruments
The CD4016 is a quad bilateral switch designed for analog or digital signal switching with high voltage ratings (up to 20V). It features low on-state resistance and high off-state leakage current, making it suitable for multiplexing applications.
CD4018B · Texas Instruments
The CD4018 is a divide-by-N counter that operates in the -55 to 125°C temperature range and comes in various package options including PDIP, SOIC, TSSOP, and CDIP.
CD4020B · Texas Instruments
The CD4020 is a 14-stage binary counter with no primary interface or digital logic pins, suitable for counting pulses in electronic circuits.
CD4021B · Texas Instruments
The CD4021 Shift Register is a digital IC used for serial-to-parallel data conversion and shift register applications.
CD4022B · Texas Instruments
The CD4022 Octal Counter is a binary ripple counter that increments its output states in response to clock pulses.
CD4023B · Texas Instruments
The CD4023 is a triple 3-input NAND gate IC, providing digital logic functions.
CD4024B · Texas Instruments
The CD4024 is a 7-stage binary counter with no specific interface or function tags provided in the datasheet.
CD4025B · Texas Instruments
The CD4025 is a triple 3-input NOR gate IC designed for digital logic applications.
CD4027B · Texas Instruments
The CD4027 is a dual JK flip-flop IC used in control, register, and toggle functions.
CD4028B · Texas Instruments
The CD4028 BCD Decoder is a logic device that converts binary-coded decimal (BCD) input to corresponding outputs.
CD4029B · Texas Instruments
The CD4029 Up/Down Counter is a binary counter that can count up and down. It supports various package options including PDIP, SOIC, and TSSOP.
CD4040B · Texas Instruments
The CD4040B is a CMOS 12-stage ripple-carry binary counter/divider. It advances on each negative clock transition and provides 12 buffered binary outputs, with an asynchronous active-high reset.
CD4042B · Texas Instruments
The CD4042 is a quad latch IC that provides latching and data storage functions.
CD4043B · Texas Instruments
The CD4043 is a quad NOR latch IC that provides four independent latches with NOR gate functionality.
CD4046 PLL
CD4046B · Texas Instruments
The CD4046B is a CMOS phase-locked loop containing a low-power linear voltage-controlled oscillator and two phase comparators, used for frequency synthesis, FM demodulation, and clock recovery.
CD4047B · Texas Instruments
The CD4047 is a monostable/astable multivibrator IC used for generating timed pulses and oscillations.
CD4050B · Texas Instruments
The CD4050 Hex Buffer is a CMOS buffer that converts logic levels and can drive two TTL loads, featuring high sink current capability.
CD4051 8-ch Mux
CD4051B · Texas Instruments
The CD4051B is a CMOS single 8-channel analog multiplexer/demultiplexer with logic-level conversion. Three address inputs and an inhibit select one of eight bidirectional channels to a common line.
CD4052B · Texas Instruments
The CD4052 is a dual 4-channel analog multiplexer that selects between multiple analog inputs based on digital control signals, with low ON resistance and leakage current.
CD4053B · Texas Instruments
The CD4053 is a triple 2-channel analog multiplexer designed for use in various applications such as signal gating and factory automation, featuring low ON resistance and channel leakage current.
CD4060B · Texas Instruments
The CD4060B combines a built-in RC or crystal oscillator with a 14-stage ripple-carry binary counter. Ten of the counter stages are available as buffered outputs, and an active-high reset clears the counter.
CD4066B · Texas Instruments
The CD4066B is a CMOS quad bilateral switch for transmitting or multiplexing analog and digital signals. Each of its four independently controlled switches has low, constant on-state resistance.
CD4067 16-ch Mux
CD4067B · Texas Instruments
The CD4067 is a 16-channel multiplexer with GPIO functionality for address and enable pins, and analog input capabilities.
CD4070 Quad XOR
CD4070B · Texas Instruments
The CD4070 is a quad XOR gate IC that performs logical operations on four independent channels.
CD4071 Quad OR
CD4071B · Texas Instruments
The CD4071 is a quad 2-input OR gate IC that provides direct implementation of the positive-logic OR function.
CD4072B · Texas Instruments
The CD4072 is a dual 4-input OR gate IC designed for digital logic applications.
CD4073B · Texas Instruments
The CD4073 is a Triple 3-input AND gate IC, providing three independent AND gates in a single package.
CD4075B · Texas Instruments
The CD4075 is a Triple 3-input OR Gate designed for digital logic applications.
CD4077 Quad XNOR
CD4077B · Texas Instruments
The CD4077 is a quad XNOR gate IC that performs logical operations and can be used in adders, subtractors, parity generators, and checkers.
CD4078B · Texas Instruments
The CD4078 is an 8-input NOR/OR logic gate IC that performs logical operations on its inputs.
CD4081 Quad AND
CD4081B · Texas Instruments
The CD4081 is a quad AND gate IC, performing logical operations on four inputs.
CD4082B · Texas Instruments
The CD4082 Dual 4-input AND is a logic IC with 14 pins, used for digital signal processing and control applications.
CD4093B · Texas Instruments
The CD4093 is a quad Schmitt NAND gate IC used for digital logic operations.
CD4094B · Texas Instruments
The CD4094B is a shift register with 16-bit data storage and parallel output.
CD4510B · Texas Instruments
The CD4510 BCD Up/Down Counter is a binary-coded decimal counter that can count up or down based on input signals.
CD4511B · Texas Instruments
The CD4511B is a CMOS BCD-to-7-segment latch/decoder/driver. It converts a 4-bit BCD input into seven segment outputs and includes lamp-test, blanking, and latch-enable controls for driving displays.
CD4512B · Texas Instruments
The CD4512 is an 8-channel data selector that allows selection of one of eight data inputs to be passed to a single output.
CD4514B · Texas Instruments
The CD4514 is a 4-to-16 decoder that converts binary-coded decimal inputs into corresponding outputs.
CD4516B · Texas Instruments
The CD4516 is a binary up/down counter designed for general-purpose counting applications.
CD4518B · Texas Instruments
The CD4518 is a dual BCD counter IC used for counting and decoding binary-coded decimal signals.
CD4520B · Texas Instruments
The CD4520 is a dual binary counter IC that performs counting operations.
CD4543B · Texas Instruments
The CD4543 BCD-to-7-segment latch is a digital IC used to convert binary-coded decimal (BCD) data into corresponding 7-segment display codes.
74HC02 Quad NOR
SN74HC02 · Texas Instruments
The 74HC02 is a quad NOR gate IC that performs the Boolean function Y = A + B in positive logic.
SN74HC04 · Texas Instruments
The 74HC04 is a high-speed CMOS logic IC containing six independent inverters. Each gate performs the Boolean function Y = NOT A, operating over a wide 2V to 6V supply range.
74HC08 Quad AND
SN74HC08 · Texas Instruments
The 74HC08 is a high-speed CMOS logic IC featuring four independent 2-input AND gates. Each gate performs the Boolean function Y = A AND B, operating from 2V to 6V.
SN74HC10 · Texas Instruments
A logic IC that implements three independent 3-input NAND gates for digital signal processing.
SN74HC109 · Texas Instruments
The 74HC109 is a dual JK flip-flop with clear and preset functions, used for data transfer on positive clock edges.
SN74HC11 · Texas Instruments
A logic IC that implements three independent 3-input AND gates, used for combining digital signals and enabling other devices.
SN74HC112 · Texas Instruments
The 74HC112 is a dual JK flip-flop designed for use in various applications such as servers, LED displays, and telecom infrastructure. It operates with a wide voltage range of 2V to 6V and has low power consumption.
SN74HC126 · Texas Instruments
The 74HC126 is a quad bus buffer with 3-state outputs, used for enabling digital signals in a wide operating voltage range.
SN74HC132 · Texas Instruments
The SN74HC132 is a quad Schmitt NAND gate with buffered inputs, designed for alarm/tamper detection circuits and logic functions.
SN74HC138 · Texas Instruments
The 74HC138 is a high-speed CMOS 3-to-8 line decoder/demultiplexer with active-low outputs. Three select inputs and three enable inputs choose one of eight outputs, easing memory decoding and cascading.
SN74HC139 · Texas Instruments
The SN74HC139 is a dual 2-to-4 decoder/demultiplexer that decodes two input lines into four outputs, with one active low output strobe G.
SN74HC14 · Texas Instruments
The 74HC14 is a high-speed CMOS hex inverter with Schmitt-trigger inputs. Input hysteresis makes it ideal for cleaning up slow or noisy signals, switch debouncing, and clock conditioning over a 2V to 6V range.
SN74HC151 · Texas Instruments
The 74HC151 is an 8-to-1 multiplexer that selects one of eight data sources based on a binary address.
SN74HC153 · Texas Instruments
The 74HC153 is a dual 4-to-1 multiplexer that selects one of four data sources based on address select inputs and can be used for parallel-to-serial conversion.
SN74HC157 · Texas Instruments
The 74HC157 is a quad 2-to-1 multiplexer that selects one of two data sources based on an address select signal.
SN74HC161 · Texas Instruments
The 74HC161 Binary Counter is a synchronous presettable counter with an internal carry look-ahead for high-speed counting applications.
SN74HC164 · Texas Instruments
The 74HC164 is an 8-bit serial-in, parallel-out shift register with AND-gated serial inputs and an asynchronous clear. It operates from 2V to 6V and is commonly used to expand output pins.
SN74HC174 · Texas Instruments
The 74HC174 is a hex D flip-flop that stores and transfers data on the positive edge of the clock pulse.
SN74HC175 · Texas Instruments
The 74HC175 is a quad D flip-flop with clear, used for buffer/storage registers and shift registers.
SN74HC193 · Texas Instruments
The 74HC193 is a 4-bit synchronous up/down binary counter that can be preset and cascaded without external circuitry.
SN74HC20 · Texas Instruments
The 74HC20 is a dual 4-input NAND gate IC that performs Boolean logic operations and can be used for various digital circuits such as alarms, latches, and tamper detection.
SN74HC21 · Texas Instruments
A dual 4-input AND gate IC that combines four input signals into a single active-low output signal.
SN74HC240 · Texas Instruments
The 74HC240 is an octal buffer with inverted data, designed for memory address drivers and bus-oriented receivers/transmitters.
SN74HC241 · Texas Instruments
The 74HC241 is an octal buffer with 3-state outputs, used for memory address drivers and bus-oriented receivers/transmitters.
SN74HC244 · Texas Instruments
The SN54HC244 and SN74HC244 are octal buffers designed to improve performance in memory address drivers, clock drivers, and bus-oriented receivers/transmitters with 3-state outputs.
SN74HC245 · Texas Instruments
The 74HC245 is an octal bus transceiver with 3-state outputs for asynchronous two-way data transfer between two 8-bit buses. A DIR pin sets direction and OE isolates the buses when high.
SN74HC251 · Texas Instruments
The 74HC251 is an 8-to-1 multiplexer with 3-state outputs that can interface directly with a system bus or drive up to 15 LSTTL loads.
SN74HC253 · Texas Instruments
The SN74HC253 is a dual 4-to-1 multiplexer with 3-state outputs, used for data selection and parallel-to-serial conversion.
SN74HC259 · Texas Instruments
The 74HC259 is an 8-bit addressable latch designed for general-purpose storage applications, capable of operating in various modes including latching data, memory retention, and demultiplexing.
SN74HC27 · Texas Instruments
The 74HC27 is a triple 3-input NOR gate IC that performs Boolean function Y = A + B + C, suitable for alarm/tamper detect circuits and S-R latches.
SN74HC273 · Texas Instruments
The 74HC273 contains eight positive-edge-triggered D-type flip-flops with a common clock and a shared active-low direct clear. It is well suited to buffer, storage, and pattern-generator registers.
74HC32 Quad OR
SN74HC32 · Texas Instruments
The 74HC32 is a high-speed CMOS logic IC with four independent 2-input OR gates, each performing Y = A + B. It runs from 2V to 6V and drives up to 10 LSTTL loads.
SN74HC365 · Texas Instruments
The 74HC365 is a hex buffer with 3-state outputs that can drive up to 15 LSTTL loads and has low power consumption.
SN74HC367 · Texas Instruments
The 74HC367 is a hex buffer with 3-state outputs designed for memory address drivers and bus-oriented receivers/transmitters.
SN74HC373 · Texas Instruments
The 74HC373 is an octal transparent D-type latch with 3-state outputs. While latch-enable (LE) is high the outputs follow the inputs; taking LE low holds the data, and OE controls the bus drivers.
SN74HC374 · Texas Instruments
The 74HC374 is an octal edge-triggered D-type flip-flop with 3-state outputs. On the rising clock edge the eight Q outputs capture the D inputs; an output-enable pin places the outputs in high impedance.
SN74HC377 · Texas Instruments
The 74HC377 is an octal D flip-flop with a positive-edge-triggered enable input, used for data storage and synchronization in digital circuits.
SN74HC393 · Texas Instruments
The 74HC393 is a dual binary counter IC that provides two independent 4-bit counters, each with clock and clear inputs.
SN74HC42 · Texas Instruments
The 74HC42 BCD-to-Decimal Decoder converts binary-coded decimal (BCD) inputs to seven-segment display codes.
SN74HC540 · Texas Instruments
74HC540 is an octal buffer with inverted data outputs, designed for use in digital circuits with a wide operating voltage range.
SN74HC541 · Texas Instruments
74HC541 is an octal buffer that provides high-current 3-state outputs and can be used in various applications like LEDs, servers, PCs, and wearable devices.
SN74HC574 · Texas Instruments
The SN74HC574 is an octal D flip-flop with 3-state outputs, designed for bus driving and suitable for buffer registers, I/O ports, bidirectional drivers, and working registers.
SN74HC688 · Texas Instruments
The 74HC688 is an 8-bit comparator IC used for comparing two 8-bit binary or BCD words.
SN74HC74 · Texas Instruments
The 74HC74 holds two independent positive-edge-triggered D-type flip-flops, each with asynchronous active-low preset and clear and complementary Q/Q outputs. It runs from 2V to 6V.
74HC86 Quad XOR
SN74HC86 · Texas Instruments
The 74HC86 is a high-speed CMOS logic IC with four independent 2-input exclusive-OR (XOR) gates. It operates from 2V to 6V and is used for phase detection and selectable inverter/buffer functions.
Single AND Gate
SN74LVC1G08 · Texas Instruments
A single 2-input positive-AND gate IC that supports 5V operation and has low power consumption.
SN74LVC1G125 · Texas Instruments
The SN74LVC1G125 is a single line driver buffer gate with a 3-state output designed for VCC operation between 1.65V and 5.5V.