← All parts
Hex Bus Drivers with 3-State Output
74368
ic logic
A hex bus driver with 3-state output for digital signals, available in various packages including SOIC and PDIP.
In stock
Specifications
3- Operating Voltage
- 5.0 V to 12.0 V (typical) / 3.0 V to 6.0 V (minimum) / 18.0 V (maximum) V
- Supply Current
- 4.0 mA (max) mA
- Package
- SOIC, PDIP
Pinout
16Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | VCC | POWER | Power supply |
| 2 | GND | GND | Ground reference |
| 3 | A0 | GPIO | General-purpose input/output |
| 4 | B0 | GPIO | General-purpose input/output |
| 5 | C0 | GPIO | General-purpose input/output |
| 6 | D0 | GPIO | General-purpose input/output |
| 7 | E0 | GPIO | General-purpose input/output |
| 8 | F0 | GPIO | General-purpose input/output |
| 9 | A1 | GPIO | General-purpose input/output |
| 10 | B1 | GPIO | General-purpose input/output |
| 11 | C1 | GPIO | General-purpose input/output |
| 12 | D1 | GPIO | General-purpose input/output |
| 13 | E1 | GPIO | General-purpose input/output |
| 14 | F1 | GPIO | General-purpose input/output |
| 15 | OE | GPIO | Output enable control |
| 16 | VCC | POWER | Power supply |
Interactive pinout
Highlight:
74368
Click a pin to copy its name · tap a tag above to spotlight a bus.