Pinouts
← All parts

ADS7038 8-ch 12-bit ADC

ADS7038

Texas Instrumentsic data converter

The ADS7038 is an 8-channel, 12-bit successive approximation register ADC with SPI interface and GPIOs.

In stock

Specifications

8
Operating Voltage
2.35V to 5.5V (AVDD), 1.65V to 5.5V (DVDD)
Supply Current
490µA to 600µA (IAVDD) at full throughput, AVDD = 5V
Interface
SPI
Resolution
12 bits
Range
0 to AVDD (FSR) V
Accuracy
±0.5 LSB DNL, ±0.5 LSB INL
Temperature Range
-40°C to +125°C
Package
3mm × 3mm WQFN (RTE)

Pinout

16
PinNameFunctionsNotes
AIN0/GPIO0Channel 0
ADCGPIO
Analog input (default), digital input, or digital output
AIN1/GPIO1Channel 1
ADCGPIO
Analog input (default), digital input, or digital output
AIN2/GPIO2Channel 2
ADCGPIO
Analog input (default), digital input, or digital output
AIN3/GPIO3Channel 3
ADCGPIO
Analog input (default), digital input, or digital output
AIN4/GPIO4Channel 4
ADCGPIO
Analog input (default), digital input, or digital output
AIN5/GPIO5Channel 5
ADCGPIO
Analog input (default), digital input, or digital output
AIN6/GPIO6Channel 6
ADCGPIO
Analog input (default), digital input, or digital output
AIN7/GPIO7Channel 7
ADCGPIO
Analog input (default), digital input, or digital output
AVDDAnalog Supply Voltage
POWER
Connect a 1-µF decoupling capacitor to GND.
DECAPDecoupling Pin
POWER
Connect a 1-µF decoupling capacitor to GND for the internal power supply.
DVDDDigital Supply Voltage
POWER
Connect a 1-µF decoupling capacitor to GND.
GNDGround
GND
Ground for the power supply; all analog and digital signals are referred to this pin voltage.
SCLKSerial Clock
SPI
Serial clock for the SPI interface.
SDISerial Data In
SPI
Serial data in for the device.
SDOSerial Data Out
SPI
Serial data out for the device.
CSChip Select
SPI
Chip-select input pin; active low. The device takes control of the data bus when CS is low. SDO goes hi-Z when CS is high.

Interactive pinout

Highlight:
ADS7038

Click a pin to copy its name · tap a tag above to spotlight a bus.