← All parts
BMI160 6-axis IMU
BMI160
Boschsensor environment
BMI160 is a low-power, 6-axis IMU providing acceleration and angular rate measurements for mobile devices and wearable tech.
In stock
Specifications
8- Operating Voltage
- 1.71V to 3.6V
- Supply Current
- 925 µA (accelerometer and gyroscope in full operation)
- Interface
- I2C, SPI
- Resolution
- 39 µs for timestamps
- Range
- 16-bit digital, triaxial accelerometer; 16-bit digital, triaxial gyroscope
- Accuracy
- Not specified in the datasheet
- Temperature Range
- Not specified in the datasheet
- Package
- 14-pin 2.5 × 3.0 × 0.83 mm3 LGA
Pinout
8Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | VDD | POWER | Power supply |
| 2 | GND | GND | Ground reference |
| 3 | SCL | I2C | Serial clock for I2C interface |
| 4 | SDA | I2C | Serial data for I2C interface |
| 5 | SCK | SPI | Clock for SPI interface |
| 6 | MISO | SPI | Master in, slave out for SPI interface |
| 7 | CS | SPI | Chip select for SPI interface |
| 8 | MOSI | SPI | Master out, slave in for SPI interface |
Interactive pinout
Highlight:
BMI160
Click a pin to copy its name · tap a tag above to spotlight a bus.