Environmental Sensor

BC2394-ND

BC2394-ND is a NTC thermistor with high accuracy over a wide temperature range, used for temperature measurement and control in consumer and industrial applications.

BMA400 · Bosch

BMA400 is a 3-axis accelerometer designed for sensing acceleration in various applications, including consumer goods and motion tracking.

BME280 · Bosch

The BME280 is a compact digital sensor that measures humidity, pressure, and temperature. It features low power consumption and supports both I2C and SPI digital interfaces, making it suitable for battery-powered devices.

BME680 · Bosch

The Bosch BME680 is a compact, low-power 4-in-1 sensor that measures gas, humidity, pressure, and temperature. It's ideal for indoor air quality monitoring and IoT devices, offering digital I2C and SPI interfaces.

BME688 · Bosch

Bosch BME688 is a digital low-power environmental sensor that measures gas, pressure, temperature, and humidity with AI capabilities for detecting volatile organic compounds (VOCs) and other gases.

BMI160 · Bosch

BMI160 is a low-power, 6-axis IMU providing acceleration and angular rate measurements for mobile devices and wearable tech.

BMI270 · Bosch

The BMI270 is a 6-axis inertial measurement unit (IMU) with accelerometer, gyroscope, and temperature sensor capabilities. It supports SPI and I2C interfaces for communication.

BMP280 · Bosch

The Bosch BMP280 is a compact digital barometric pressure sensor module. It measures absolute pressure and temperature, offering high accuracy and low power consumption for mobile and embedded applications. It supports I2C and SPI interfaces.

BMP388 · Bosch

The Bosch BMP388 is a compact, low-power digital barometric pressure and temperature sensor. It offers high relative accuracy for altitude tracking, a 512-byte FIFO, and interrupt support, and communicates over I2C or SPI. Ideal for drones and navigation.

BMP390 · Bosch

The BMP390 is a pressure sensor that provides digital interface for SPI and I²C communication.

DHT22 · Aosong

The DHT22 (AM2302) is a low-cost digital sensor that measures relative humidity and temperature. It features a calibrated digital signal output, long-term stability, and a single-bus communication interface, making it suitable for various applications.

DS18B20 · Analog Devices

The DS18B20 is a digital thermometer that measures temperature from -55°C to +125°C with user-selectable resolution. It communicates via a single data line (1-Wire bus) and can be powered directly from this line, eliminating the need for an external power supply.

HDC1080 · Texas Instruments

The HDC1080 is a low-power digital humidity/temperature sensor that communicates via I2C and provides accurate measurements with high resolution.

HDC2080 · Texas Instruments

The HDC2080 is a low-power humidity and temperature sensor with I2C interface, providing high accuracy measurements in small DFN packages.

LM35 · Texas Instruments

The LM35 is a precision analog temperature sensor with an output voltage linearly proportional to Centigrade temperature at 10 mV/°C. It needs no external calibration and runs from a 4 V to 30 V supply.

LM45 · Texas Instruments

The LM45 is a precision temperature sensor that outputs a voltage linearly proportional to the Celsius temperature, with an accuracy of ±2°C at room temperature and ±3°C over its full range.

LM75B · Texas Instruments

The LM75B is a digital temperature sensor with an I2C interface, providing 9-bit accuracy over a wide temperature range.

LM92 · Texas Instruments

LM92 is a digital temperature sensor with an I2C interface, providing accurate temperature readings within a range of -25°C to 150°C and featuring programmable upper and lower thresholds.

LMT86 · Texas Instruments

The LMT86 is an analog temperature sensor with a ±0.4°C typical accuracy and operates from -50°C to 150°C.

MCP9808 · Microchip

The MCP9808 is a digital temperature sensor with I2C interface and user-programmable temperature limits.

MPU-6050 · InvenSense

The MPU-6050 is a 6-axis IMU that combines a 3-axis gyroscope and accelerometer with an onboard digital motion processor for sensor fusion.

SGP30 · Sensirion

SGP30 is a digital gas sensor designed for indoor air quality monitoring, providing TVOC and CO2eq measurements via I2C interface.

SGP40 · Sensirion

SGP40 is a digital VOC sensor for indoor air quality, featuring a MOx-based gas sensing element and a temperature-controlled micro hotplate with a digital I2C interface.

SHT31 · Sensirion

The SHT3x-DIS is a fully calibrated digital sensor that measures humidity and temperature. It features an I2C interface, a wide supply voltage range, and enhanced accuracy, making it suitable for various applications.