← All parts
IC MCU 8BIT 3.5KB FLASH 18DIP
IC MCU 8BIT 3.5KB FLASH 18DIP
ic
A 8-bit microcontroller with 1.8k Flash, featuring various I/O and timers.
In stock
Specifications
4- Package
- 18DIP
- Operating Voltage
- 2.0V to 5.5V
- Supply Current
- 36µA (typical) at 1.8V
- Interface
- USART, SPI, I/O
Pinout
16| Pin | Name | Functions | Notes |
|---|---|---|---|
| RA0 | RA0/AN0 | GPIO | Bi-directional I/O port |
| RA1 | RA1/AN1 | GPIO | Bi-directional I/O port |
| RA2 | RA2/AN2/VREF | GPIO | Bi-directional I/O port, VREF output |
| RA3 | RA3/AN3/CMP1 | GPIO | Bi-directional I/O port |
| RA4 | RA4/T0CKI/CMP2 | GPIO | Bi-directional I/O port, Timer0 clock input |
| RA5 | RA5/MCLR/VPP | POWER | Input port for MCLR and VPP |
| RA6 | RA6/OSC2/CLKOUT | GPIO | Bi-directional I/O port, Oscillator crystal output |
| RA7 | RA7/OSC1/CLKIN | GPIO | Bi-directional I/O port, Oscillator crystal input |
| RB0 | RB0/INT | GPIO | Interrupt pin with internal weak pull-up |
| RB1 | RB1/RX/DT | UART | USART receive and data I/O |
| RB2 | RB2/TX/CK | UART | USART transmit and clock I/O |
| RB3 | RB3/CCP1 | PWM | Capture/Compare/PWM I/O |
| RB4 | RB4/PGM | GPIO | Low voltage programming input, interrupt-on-pin-change |
| RB5 | RB5 | GPIO | Interrupt-on-pin-change with internal weak pull-up |
| RB6 | RB6/T1OSO/T1CKI/PGC | SPI | Bi-directional I/O port, Timer1 oscillator output and input, ICSP clock |
| RB7 | RB7/T1OSI/PGD | SPI | Bi-directional I/O port, Timer1 oscillator input and ICSP data |
Interactive pinout
Highlight:
IC MCU 8BIT 3.5KB FLASH 18DIP
Click a pin to copy its name · tap a tag above to spotlight a bus.